【摘要】：采用自行研制的全自動定氮儀測定硝化棉的含氮量,研究了樣品前處理條件、全自動定氮儀實驗參數對檢測結果的影響;討論了實驗的準確性與重復性,對全自動定氮儀法與傳統合金還原法進行了比較。結果表明,樣品前處理采用石墨爐加熱,梯度升溫的皂化模式;最佳實驗參數為:蒸汽體積分數80%、預熱30s、還原反應7min、硼酸體積35mL、蒸餾時間8min;與傳統合金還原法相比,采用全自動定氮儀檢測硝化棉含氮量的方法用時少、操作簡單,自動化程度高,減少了人為誤差的影響,可保證結果的精度和準確性。
[Abstract]:The determination of nitrogen content in nitrified cotton with a fully automatic nitrogen-fixing instrument developed by ourselves was used to study the effect of sample pretreatment conditions and experimental parameters of automatic nitrogen-fixing instrument on the results of the test, and the accuracy and repeatability of the experiment were discussed. A comparison was made between the automatic nitrogen-determination method and the traditional alloy reduction method. The results show that the saponification mode of sample pretreatment is graphite furnace heating and gradient heating, the optimum experimental parameters are as follows: steam volume fraction 80, preheating 30 s, reduction reaction 7 min, boric acid volume 35 mL, distillation time 8 min. The method of detecting nitrogen content in nitrified cotton with automatic nitrogen-fixing instrument has the advantages of less time, simple operation and high automation degree, which can reduce the influence of human error and ensure the accuracy and accuracy of the result.
【作者單位】： 西安近代化學研究所;
【基金】：國防科工局技術基礎計量項目(J092012A005)
【分類號】：O652.9;TQ075.1

【相似文獻】

相關期刊論文 前1條

1 湯國魁;;快速、準確、微量的半自動定氮儀[J];沈陽化工;1985年02期

，

本文編號：2129746