本文選題：脫合金 + 電催化劑　； 參考：《功能材料》2017年04期

【摘要】：采用單輥旋淬方法制備了成分和結構均勻的鉑鈦銅合金條帶,通過脫合金方法進行選擇性腐蝕得到了具有三維雙連續孔洞結構的納米多孔鉑鈦銅(np-PtTiCu)催化劑。將np-PtTiCu作為三電極測試體系中的工作電極,利用循環伏安法表征了其對甲酸、乙醇和甲醇的電催化氧化性能以及抗CO中毒能力,利用恒電位極化方法表征了其電催化穩定性。結果表明,np-PtTiCu催化劑比Pt/C催化劑具有更高的電催化活性,更好的抗CO中毒能力和穩定性,這些性能的改善與電極材料的多孔結構有關。
[Abstract]:Pt-Ti-Cu alloy ribbons with uniform composition and structure were prepared by single roll spinning quenching method. The nano-porous Pt-Ti Cu / Cu catalyst with three dimensional double continuous pore structure was prepared by selective corrosion by dealloying method. Using np-PtTiCu as the working electrode in the three-electrode measurement system, the electrocatalytic oxidation of formic acid, ethanol and methanol and its ability to resist CO poisoning were characterized by cyclic voltammetry. The electrocatalytic stability of np-PtTiCu was characterized by potentiostatic polarization method. The results show that np-PtTiCu catalyst has higher electrocatalytic activity, better resistance to CO poisoning and better stability than that of Pt / C catalyst. The improvement of these properties is related to the porous structure of electrode materials.
【作者單位】： 上海理工大學材料科學與工程學院;上海理工大學機械工程學院;天津理工大學新能源材料與低碳技術研究院;
【基金】：上海市科委地方高校能力建設計劃資助項目(16060502400)
【分類號】：O643.36;TM911.4
，

本文編號：2047845