本文選題：鉬尾礦 + 泡沫陶瓷�。� 參考：《人工晶體學報》2017年03期

【摘要】：以商洛鉬尾礦為主要原料,添加鉀長石、高嶺土等輔助原料,以SiC為發泡劑,制備高鉬尾礦含量的輕質保溫隔熱泡沫陶瓷。采用正交實驗確定影響泡沫陶瓷體積密度四個因素的主次程度依次為:SiC添加量、升溫速率、保溫時間和燒成溫度。最終以8℃/min的升溫速度升至800℃,再以1℃/min升至1140℃,保溫20 min,隨爐冷卻制得體積密度0.34 g/cm~3,抗壓強度3.2 MPa,平均孔徑1.8 mm,氣孔分布均勻的高性能輕質保溫隔熱泡沫陶瓷材料。
[Abstract]:Using Shangluo molybdenum tailings as main raw material, adding potassium feldspar and kaolin as auxiliary raw materials and SiC as foaming agent, light heat insulating foam ceramics with high content of molybdenum tailings were prepared. The main and secondary factors affecting the bulk density of foamed ceramics were determined by orthogonal experiment: the content of sic, the heating rate, the holding time and the sintering temperature. Finally, the temperature rise rate of 8 鈩，

本文編號：1983684