本文選題：硅酸鋁纖維板 + 防護熱板法　； 參考：《耐火材料》2017年04期

【摘要】：以防護熱板法測量熱導率,分析了測試溫度(≤500℃)、密度對硅酸鋁纖維板熱導率的影響,建立了硅酸鋁纖維板熱導率的擬合方程,并通過實際測量對擬合方程進行驗證。結果表明:硅酸鋁纖維板的熱導率與測試溫度、密度具有顯著的線性關系。實測結果與擬合方程的計算結果相吻合,≤300℃時的偏差在±3%以?xún)?nèi),500℃時的偏差在±5%以?xún)?nèi),可見,擬合方程準確可靠,可作為硅酸鋁纖維板熱導率確定的一種參考方法。
[Abstract]:The thermal conductivity was measured by the protective thermal plate method. The effect of the test temperature (less than 500) and the density on the thermal conductivity of the aluminum silicate fiberboard was analyzed. The fitting equation of the thermal conductivity of the aluminum silicate fiberboard was established. The fitting equation was verified by the actual measurement. The results show that the thermal conductivity of the aluminum silicate fiberboard has a significant line with the test temperature and density. The measured results are in agreement with the calculated results of the fitting equation. The deviations at less than 300 degrees are within + 3%, and the deviation at 500 is less than 5%. The fitting equation is accurate and reliable, which can be used as a reference method for determining the thermal conductivity of aluminum silicate fiberboard.
【作者單位】： 山東非金屬材料研究所;
【基金】：國防技術基礎項目(JSJC2013208C035)
【分類號】：TQ175.1

【相似文獻】

相關期刊論文 前2條

1 盛景云,方維平,王躍敏;雙自變量化學化工實驗數據的新擬合方程[J];化工學報;2004年09期

2 富暢;吳大可;黃旭;;超臨界CO_2壓縮因子實驗數據的新擬合方程[J];貴州工業大學學報(自然科學版);2005年06期

，

本文編號：1922194