發布時間：2018-04-20 07:37

  本文選題：硝酸根離子 + 鍍件　； 參考：《電鍍與環保》2017年05期

【摘要】：正0故障起因2016年9月,車間領料員錯將硝酸領到氯化鉀掛鍍鋅線調節pH值的堆放點。班組工藝管理員用鹽酸調節pH值時未仔細看標貼,錯將硝酸當作鹽酸加入槽中。由于是8 000L的大槽,所以加入硝酸后并未出現明顯的故障,只是鍍件上出現少量黑色陰影,當時并沒有引起重視。我們是三班制生產,白班人員沒發覺,夜班人員也沒發現,仍將硝酸當作
[Abstract]:In September 2016, the workshop collars mistakenly led nitric acid to the stacking point where the pH value was adjusted by the potassium chloride galvanizing line. When adjusting pH value with hydrochloric acid, the process manager of the team did not carefully look at the label and mistook nitric acid as hydrochloric acid to be added to the tank. Because it is a large trough of 8 000 L, there is no obvious fault after adding nitric acid, only a small amount of black shadow appears on the plating, which did not attract much attention at that time. We are three shifts production, the day shift personnel did not notice, the night shift staff did not notice, still regards the nitric acid as the nitric acid
【作者單位】： 如東縣鐵鏈廠有限公司;
【分類號】：TQ153

【相似文獻】

相關期刊論文 前3條

1 宋惠琴;劉淑玉;陳文萍;;電極法測定銅/鎳/鉻鍍層退鍍?nèi)芤褐邢跛岣暮縖J];電鍍與精飾;1985年05期

2 吳明s�，，李理，徐瓤d

本文編號：1776852