本文選題：熱處理　切入點：無公害熔劑　出處：《中國陶瓷》2017年01期 　論文類型：期刊論文

【摘要】：采用傳統的熔制法制備了ABS系統無公害陶瓷釉上熔劑,研究了不同熱處理時間對熔劑耐堿性和顯微結構的影響。用光澤度儀、XRD及TEM等對樣品的光澤度、物相組成和顯微結構進行了分析。結果表明:620℃熱處理能有效地提高熔劑的耐堿度,熱處理20 h時所得熔劑的最佳耐堿度為69.8%,耐蝕性等級為1級。隨著熱處理時間的延長,產生的滴球狀分相尺寸逐漸增大,20 h時分相尺寸多為60~80 nm。
[Abstract]:The fluxes of ABS system pollution-free ceramic glaze were prepared by traditional melting method. The effects of different heat treatment time on the alkali resistance and microstructure of the fluxes were studied. The phase composition and microstructure of the flux were analyzed. The results show that the alkali resistance of the flux can be improved effectively by heat treatment at: 620 鈩，

本文編號：1647421