本文選題：攪拌　切入點：剪切性能　出處：《化學工程》2017年08期 　論文類型：期刊論文

【摘要】：不同攪拌工況下剪切性能的需求是選用攪拌器的一個重要指標,文中基于對常規的6種攪拌器流場的CFD模擬,計算了攪拌器各自的剪切性能量綱一數C_3,分析了攪拌流場中剪應力的累計概率分布及統計平均結果。二者對比發現:從宏觀平均效果上看,攪拌器剪切性能滿足直葉槳斜葉槳,圓盤渦輪開啟渦輪槳式;而剪應力極大值影響作用則是直葉圓盤渦輪斜葉圓盤渦輪直葉槳式斜葉開啟渦輪直葉開啟渦輪斜葉槳式。因此,對剪切作用敏感的攪拌過程,在采用常規的攪拌器剪切性能評價的基礎上,還需要充分考慮攪拌流場中剪應力極大值的影響,合理選用攪拌器。
[Abstract]:The requirement of shear performance under different stirring conditions is an important index of selecting agitator. This paper is based on the CFD simulation of the flow field of six kinds of agitators. The shear performance dimensions of agitator C3 are calculated, and the cumulative probability distribution and statistical average results of shear stress in agitator flow field are analyzed. It is found that the shear performance of agitator meets the oblique blade propeller of straight blade from the macroscopic average effect. The effect of the maximum shear stress on the turbine propeller is that of the straight blade, the straight blade, the straight blade, the straight blade, and the straight blade. Therefore, the agitation process is sensitive to the shear action. Based on the conventional evaluation of the shear performance of agitator, it is necessary to consider the influence of the maximum shear stress in the mixing flow field and select the stirrer reasonably.
【作者單位】： 西北大學化工學院;
【基金】：國家自然科學基金資助項目(11102153) 陜西省自然科學基礎研究計劃青年人才資助項目(2013JQ2001) 省級大學生創新創業訓練計劃基金資助項目(S201710697020)
【分類號】：TQ051.72

【相似文獻】

相關期刊論文 前2條

1 張志兵,戴干策,范自暉;動物細胞發酵缶的混合與剪切性能評價[J];高�；瘜W(xué)工程學報;1990年01期

2 張力偉;趙穎華;江阿蘭;倪慶清;;受酸腐蝕混凝土的剪切性能及聲發射特征研究[J];建筑材料學報;2011年03期

，

本文編號：1601060