本文選題：質量源 + 內孤立波��； 參考：《海洋與湖沼》2016年06期

【摘要】：為研究?jī)?nèi)孤立波質量源數值造波方法,本文采用兩個點源形式的質量源,分別放置于兩層流體的上下層中作為內孤立波激發源。推導源項表達式,從不可壓縮流體的Navier-Stokes方程出發,結合內孤立波Kd V、e Kd V理論,基于商業軟件FLUENT發展了一種內孤立波質量源數值造波方法。通過數值模擬,分析了質量源造波過程中內孤立波的生成過程,并將數值模擬結果同理論及實驗作對比。結果表明:基于此方法生成的內孤立波波形、波高及波致水平速度與理論及實驗吻合度較好,該方法是可行的,并且耗時短、效率高。
[Abstract]:In order to study the numerical wave generation method of internal solitary wave mass sources, two mass sources in the form of point sources are used as excitation sources of internal solitary waves in the upper and lower layers of two layers of fluid respectively. Based on the Navier-Stokes equation of incompressible fluid and the theory of internal solitary wave, a numerical method of internal solitary wave mass source is developed based on commercial software FLUENT. Through numerical simulation, the generation process of internal solitary waves in the process of mass source wave-making is analyzed, and the numerical simulation results are compared with the theoretical and experimental results. The results show that the wave height and wave induced horizontal velocity generated by this method are in good agreement with the theoretical and experimental results. The method is feasible, time-consuming and efficient.
【作者單位】： 中國海洋大學工程學院;
【基金】：國家自然科學基金項目;51279187號 山東省科技重大專項項目;2015ZDZX04003號
【分類號】：P731.24

【相似文獻】

相關期刊論文 前1條

1 陳薛浩;朱志夏;;基于Fluent的海底管線附近流場分析[J];上海交通大學學報;2012年03期

相關碩士學位論文 前1條

1 劉國營;基于ANSYS和FLUENT的海底沉積物原位保真采樣系統性能分析[D];中國海洋大學;2009年

，

本文編號：1894517