多孔介質傳熱傳質及熱濕應力分析.pdf 全文 文檔投稿網
本文關鍵詞:多孔介質傳熱傳質及熱濕應力分析,,由筆耕文化傳播整理發布。
南京航空航天大學
碩士學位論文
多孔介質傳熱傳質及熱濕應力分析
姓名:王元妹
申請學位級別:碩士
專業:人機與環境工程
指導教師:蘇向輝
20080101南京航空航天大學碩士學位論文
摘要
本論文以建筑材料為工程背景,研究了含濕多孔介質內部傳熱、傳濕
的過程,并對由熱濕作用引起的介質內部應力進行分析研究。
本文將多孔介質看作宏觀意義上的虛擬連續介質,以 Luikov方程為
耦合模型,采用有限差分法對多孔介質材料的一維和二維瞬態傳熱、傳濕
進行模擬研究,得出空心圓柱及平板內部的溫度及含濕量的動態分布。在
求解過程中考慮了瞬態邊界條件,使計算結果更精確,更符合實際。同時
探討了不同無量綱準則數對熱濕擴散的影響,從而更好地理解多孔介質傳
熱傳質的本質。
在對多孔介質傳熱傳質過程研究的基礎上,將熱彈性力學理論應用于
溫濕度耦合的情況,得出熱濕作用下的本構方程。從而進行了空心圓柱熱
濕應力分析及平面板的熱濕應力分析,以數值法得到了多孔材料的位移和
熱濕應力動態分布,同時通過對熱應力及濕應力的分別求解,得出了熱、
濕對熱濕應力的作用及影響。熱濕應力的研究對多孔材料的裂紋分析具有
重要的借鑒作用。
關鍵詞:多孔介質,耦合,傳熱傳質,本構方程,熱濕應力
i多孔介質傳熱傳質及熱濕應力分析
ABSTRACT
The thesis is mainly on the research of the process of heat and mass
transfer in porous media and the analysis of hygrothermal stress induced by
temperature and moisture effect by taking building materials as an engineering
backgroundBased on Luikov’s equations as coupling model , porous media is treated
as virtual continuous body in macro-scale. The process of transient coupled
heat and moisture transfer in one-dimensional and two-dimensional porous
structures are si
本文關鍵詞:多孔介質傳熱傳質及熱濕應力分析,由筆耕文化傳播整理發布。
本文編號:231554
本文鏈接:http://sikaile.net/kejilunwen/dongligc/231554.html