【摘要】：由于嵌入式設備與設備之間的控制過程很難形成固定順序,導致在設備控制的過程中,一旦設備控制順序不孤單,會導致傳統的靜態節能控制方法無法把握準確的控制規律,出現控制偏差,能耗較大。提出改進小波包變換的嵌入式節能控制方法。將系統控制中的優化節能問題轉換為一個動態優化問題,并且與常規的控制回路相結合,以系統中一個時期內的累積費用最小為目標函數,在滿足常規控制回路的同時,設定節能控制的上下限,求解出最佳優化控制節能函數,完成了系統控制中優化節能。仿真結果表明,改進小波包變換算法的嵌入式控制中的優化節能設計方法有效的避免了能量的損耗,達到了高效節能控制的目的。
[Abstract]:Because it is difficult to form a fixed sequence between embedded devices and devices, once the control sequence of equipment is not lonely, the traditional static energy saving control method can not grasp the accurate control law. There is a control deviation, the energy consumption is large. An embedded energy saving control method based on improved wavelet packet transform is proposed. The optimization and energy saving problem in system control is transformed into a dynamic optimization problem, and combined with the conventional control loop, the minimum cumulative cost in a period of the system is taken as the objective function, and the conventional control loop is satisfied at the same time. The upper and lower limits of the energy saving control are set, and the optimal energy saving function of the optimal control is solved, and the optimal energy saving in the system control is completed. Simulation results show that the improved wavelet packet transform algorithm in the embedded control optimization energy-saving design method effectively avoid the loss of energy and achieve the purpose of efficient energy-saving control.
【作者單位】： 鄭州大學西亞斯國際學院;
【基金】：2015年度河南省高等學校重點科研項目(15B510014)
【分類號】：TK018
，

本文編號：2223607