本文選題：管殼式廢熱鍋爐 + 外壁溫度��； 參考：《耐火材料》2016年03期

【摘要】：分析了管殼式廢熱鍋爐在運行時外壁實測溫度與理論計算值存在較大偏差的原因,指出了設備隔熱耐磨襯里層的金屬錨固釘導熱對外壁溫度的影響尤為重要。另外,設備外部環境溫度的變化,耐火材料本身熱導率的偏差,耐火襯里層結構的偏差或施工過程中發生的諸如過度振搗引起的材料熱導率偏差等都是不容忽視的因素。
[Abstract]:This paper analyzes the reasons for the deviation between the measured temperature of the outer wall of the tube and shell type waste heat boiler in operation and the theoretical calculation value, and points out that the influence of the heat conduction of the metal anchor nail on the temperature of the outer wall of the equipment heat insulation and wear resistant lining layer is particularly important. In addition, the temperature change in the external environment of the equipment, the deviation of the thermal conductivity of the refractory itself, the deviation of the structure of the refractory lining or the deviation of the thermal conductivity of the material caused by excessive vibration during construction are all factors that can not be ignored.
【作者單位】： 同濟大學;鎮海石化建安工程有限公司;中鋼集團洛陽耐火材料研究院有限公司;
【分類號】：TK229

【相似文獻】

相關期刊論文 前3條

1 胡鳴;環境溫度和風速對加熱爐外壁溫度及散熱損失的影響[J];石油化工設備技術;2005年01期

2 王為術;徐維暉;陳聽寬;羅毓珊;;非均勻受熱管管壁溫度場的數值計算[J];熱能動力工程;2007年04期

3 ;[J];;年期

，

本文編號：1990679