利用熱式傳感器測量環狀流濕氣含率
發布時間:2018-04-11 11:11
本文選題:濕氣 + 濕氣含率 ; 參考:《天津大學學報(自然科學與工程技術版)》2016年11期
【摘要】:為實現濕氣兩相流的在線不分離含氣率測量,探究了濕氣兩相流的傳熱特性,設計一種新型熱式傳感器,并在天津大學中壓濕氣裝置上進行了實驗.實驗涵蓋了0.3~1.2,MPa之間的6個壓力點,氣相弗勞德數范圍為0.5~2.7,濕氣含率的變化范圍為96.5%,~100%,,共對215個點進行了傳感器測量特性的實驗研究,引入了無量綱傳熱系數h~+,并基于h~+建立了體積含氣率的模型,該模型平均誤差為0.39%,,均方根誤差為0.59%,.
[Abstract]:In order to measure the gas content of wet two-phase flow without separation on line, the heat transfer characteristics of wet two-phase flow were investigated. A new type of heat sensor was designed, and the experiment was carried out on the medium-pressure wet gas device of Tianjin University.The experiment covers six pressure points between 0.3 and 1.2 MPA. The range of Froude number of gas phase is 0.5 ~ 2.7, and the variation range of moisture holdup is 96.50.The measurement characteristics of 215 points have been studied experimentally, and the dimensionless heat transfer coefficient (h~) has been introduced.The model of volumetric gas holdup is established based on H-, the average error of the model is 0.39 and the root mean square error is 0.59g.
【作者單位】: 天津大學電氣與自動化工程學院;
【分類號】:TP212;TK31
,
本文編號:1735761
本文鏈接:http://sikaile.net/kejilunwen/dongligc/1735761.html
最近更新
教材專著