初始?jí)毫?duì)氫-空氣預混誘導湍流燃燒的影響
發布時間:2018-03-29 12:44
本文選題:網孔板 切入點:定容燃燒彈 出處:《內燃機學報》2016年05期
【摘要】:在頂置點火定容燃燒彈內加入一個網孔板,采用紋影法和壓力采集系統,研究不同初始?jí)毫ο職錃?空氣預混合氣穿過網孔時的火焰?zhèn)鞑ヌ匦砸约皦毫μ匦?結果表明:火焰通過網孔板時產生射流,網孔間火焰相互干涉,火焰前鋒面積增加,誘導成湍流燃燒;相對于未添加網孔板而言,最大燃燒壓力值幾乎不變,達到最大壓力的時刻提前,燃燒持續期縮短;火焰穿過網孔板后,傳播速度提高,壓力升高率增加;隨著初始?jí)毫Φ脑黾?添加網孔板后的燃燒持續期變化率先增大后減小,在初始?jí)毫?.10,MPa時達到最大值.
[Abstract]:A mesh plate was added to the top ignited constant volume combustion bomb, and the method of schlieren and the pressure acquisition system were adopted. The flame propagation characteristics and pressure characteristics of hydrogen-air premixed gas passing through the mesh at different initial pressures are studied. The results show that the jet flow occurs when the flame passes through the mesh plate, and the flame interacts with each other between the meshes, and the front area of the flame increases. Compared with the plate without meshes, the maximum combustion pressure is almost constant, the time of reaching the maximum pressure is earlier, the combustion duration is shortened, the velocity of flame propagating through the mesh plate is increased, and the increasing rate of pressure is increased. With the increase of initial pressure, the change of combustion duration increases first and then decreases after adding mesh plate, and reaches the maximum when the initial pressure is 0.10 MPA.
【作者單位】: 北京理工大學機械與車輛學院;北京電動車輛協同創新中心;
【基金】:高等學校學科創新引智計劃資助項目(B12022)
【分類號】:TK401
【相似文獻】
相關期刊論文 前3條
1 焦琦;苗海燕;黃潛;黃佐華;蔣德明;曾科;;初始?jí)毫?duì)天然氣-氫氣-空氣混合氣火焰?zhèn)鞑ヌ匦缘挠绊慬J];燃燒科學與技術;2009年04期
2 О.Б.Леонов,В.П.Попов,高振庚;采用可調初始?jí)毫┯拖到y(tǒng)以改善柴油機部分負荷工況的經濟性[J];車用發動機;1983年01期
3 ;[J];;年期
,本文編號:1681197
本文鏈接:http://sikaile.net/kejilunwen/dongligc/1681197.html
最近更新
教材專著