【摘要】：針對現有接邊方法依賴于直線型接邊線,難以有效的支持非直線型接邊線的數據接邊質量檢驗的問題,提出了一種新的基于距離與角度控制的矢量面數據接邊檢查方法。該方法利用矢量面到接邊線的距離值與弧段轉角角度值作為參考量檢測接邊特征點,通過匹配接邊特征點的方式檢測接邊錯誤位置,不依賴于接邊線的具體形態,能夠適用于任意類型接邊線的矢量面數據接邊檢查。以第一次全國地理國情普查數據接邊檢驗為實例進行驗證,結果表明,該方法的漏檢率為0%,準確率達到95%以上,有效地提升了接邊線非直線的矢量面數據接邊質量檢驗的準確性及效率。
[Abstract]:Aiming at the problem that the existing edge-connecting method is difficult to effectively support the quality inspection of the data of the non-linear connection line, a new method for edge checking of the data of the vector surface based on the distance and the angle control is proposed. the method uses the distance value of the vector surface to the ground line and the angle value of the arc-segment angle as the reference quantity to detect the edge-receiving characteristic point, And can be applied to the edge checking of the vector surface data of any type of connection line. The results show that the error rate of the method is 0%, the accuracy rate is over 95%, and the accuracy and efficiency of the quality inspection of the non-linear vector surface data of the ground line are effectively improved.
【作者單位】： 四川省測繪產品質量監督檢驗站;
【基金】：測繪地理信息公益性科研專項(201512018) 四川省測繪地理信息局科技支撐項目(J2015ZC06)
【分類號】：P208
，

本文編號：2494424