基于UCE影像的像控網設計方案對空中三角測量精度的影響
[Abstract]:For the traditional photogrammetry based on film image, the density of the image control point is clearly required in the current field of aerial photogrammetry, but the density of the image control point for the digital image aerial photogrammetry based on multi-lens composite, There is no explicit provision in the current norms. Therefore, it is of great practical significance to seek economic and reasonable image control network design for aerial photogrammetry of this digital image. Taking a gentle hilly area of 270km2 as an example, for aerial triangulation of 1: 1000 scale photogrammetry based on UCE digital image, according to the method of increasing density step by step, this paper puts forward 14 kinds of image-controlled point layout schemes with different densities. The plane and elevation coordinates of image control points were collected by using network RTK, and the conventional aerial triangulation test and the aerial triangulation experiment assisted by POS were carried out by using Inpho software. The following conclusions are obtained: (1) the thinner the image control point density, the smaller the field workload, but the lower the precision. When the density of image control points is low to a certain extent, the aerial triangulation results will not meet the precision requirements of photogrammetry. (2) for conventional aerial triangulation, there are only 25-28 image control points in the 270km2 flat hill survey area. The density of image control point is about one point per 10km2. Compared with traditional photogrammetry, the number of image control points can be reduced by about 40%. (3) for POS aided aerial triangulation, in the 270km2 levelling hilly area, By skilled operator, even if only 4 image control points are distributed, the image control point density can be reduced to one image control point per 70 km2. Compared with traditional photogrammetry, the number of image control points can be reduced by more than 90%.
【學位授予單位】:湘潭大學
【學位級別】:碩士
【學位授予年份】:2017
【分類號】:P231.4
【參考文獻】
相關期刊論文 前10條
1 鄭穎;喬煒;沈瑩;秦思嫻;高雅冰;;基于UCX數字航空影像的空三加密像控點布設方案探討[J];城市勘測;2016年02期
2 周思怡;周茂春;;基于Inpho攝影測量系統數字正射影像圖的制作[J];江西科學;2015年06期
3 郭如寶;;淺談UCE數碼航攝儀在國家基礎航空攝影項目中的應用[J];西部資源;2014年04期
4 王鑫;姜挺;;DMC Ⅱ數字航空攝影傳感器性能改進及應用[J];影像技術;2012年02期
5 袁修孝;吳珍麗;季順平;;POS影像外方位元素相關性對模型上下視差理論精度的影響[J];武漢大學學報(信息科學版);2009年08期
6 袁修孝;;航空攝影測量中立體模型的重建(英文)[J];Geo-Spatial Information Science;2008年04期
7 ;A novel method of systematic error compensation for a position and orientation system[J];Progress in Natural Science;2008年08期
8 戴小真;;基于INPHO系列軟件的數字正射影像圖的制作[J];現代測繪;2007年05期
9 袁修孝;傅建紅;左正立;孫紅星;;機載POS系統用于航空遙感直接對地目標定位的精度分析[J];武漢大學學報(信息科學版);2006年10期
10 張書煌,呂良壽,王蘇京;全數字?jǐn)z影測量與4D技術探討[J];遙感信息;2000年04期
相關博士學位論文 前4條
1 曹輝;智能空中三角測量中若干關鍵技術的研究[D];武漢大學;2013年
2 范業穩;基于DMC的航空攝影測量誤差分析和質量控制方法研究[D];武漢大學;2011年
3 吳珍麗;POS輔助航測地形測圖的關鍵技術研究[D];武漢大學;2010年
4 王慧;面陣CCD航測相機成像模型與處理技術[D];解放軍信息工程大學;2006年
相關碩士學位論文 前5條
1 周思怡;GPS/INS輔助空中三角測量技術研究及應用[D];東華理工大學;2016年
2 趙桂華;大面陣CCD數字航空相機影像預處理技術研究[D];解放軍信息工程大學;2012年
3 趙俊羽;GPS輔助空中三角測量在大比例尺航空攝影測量中的實驗研究[D];昆明理工大學;2010年
4 王宏濤;精密單點定位技術在GPS輔助空中三角測量中的應用研究[D];河南理工大學;2010年
5 吳俊;GPS/INS輔助航空攝影測量原理及應用研究[D];解放軍信息工程大學;2006年
,本文編號:2380017
本文鏈接:http://sikaile.net/kejilunwen/dizhicehuilunwen/2380017.html