發布時間：2018-11-22 08:56

【摘要】：針對當前煤礦井下定向鉆進技術與儀器無法判識地層,且鉆進效率和煤層鉆遇率低等不足,以煤系的自然伽馬為地層識別依據,通過自然伽馬測量技術、信號有線傳輸技術和信號解調技術等手段,研制了基于自然成功的礦用有線地質導向隨鉆測量裝置,并配套開發了地質導向鉆進技術工藝,該裝置在2個煤礦進行了試驗。試驗結果表明:煤系的自然伽馬可用于評估鉆頭位置的地層信息,結合鉆孔軌跡參數測量,控制鉆孔沿著預定方向在目的地層中延深,降低了分支孔施工數量,為提高煤層鉆遇率、探明礦區地層地質信息、保障鉆探施工安全及提高鉆探施工效率提供了有效手段。
[Abstract]:In view of the deficiency of the current directional drilling technology and instrument in coal mine, such as low drilling efficiency and coal seam drilling rate, taking the natural gamma of coal measure as the basis of formation identification, the natural gamma measurement technology is adopted. Based on the technology of signal wired transmission and signal demodulation, a measurement device for mine wired geological guidance while drilling is developed based on natural success, and the technology of geological guided drilling is also developed. The device has been tested in two coal mines. The test results show that the natural gamma ray of coal measures can be used to evaluate the formation information of bit position, combined with the measurement of drilling trajectory parameters, the drilling hole can be controlled to extend deep in the destination layer along the predetermined direction, and the construction number of branch holes can be reduced. It provides an effective means to improve the rate of coal seam drilling, to ascertain the geological information of strata in mining area, to ensure the safety of drilling construction and to improve the efficiency of drilling construction.
【作者單位】： 中國煤炭科工集團西安研究院有限公司;西安科技大學建筑與土木工程學院;
【基金】：國家科技重大專項資助項目(2016ZX05045-003) 陜西省2011年科技統籌創新工程計劃資助項目(2011KTCG-01-10)
【分類號】：TD178;TD823

【相似文獻】

相關期刊論文 前6條

1 李靜;;煤礦井下隨鉆測量技術展望[J];儀器儀表用戶;2011年04期

2 胡小林;黃麟森;王清峰;;煤礦井下隨鉆測量技術的應用研究[J];礦冶;2012年04期

3 張佳;呂琦;程海;;隨鉆測量及其應用[J];電子測試;2013年06期

4 孫榮軍;葉根飛;;Microsoft Excel在隨鉆測量數據處理和軌跡圖繪制中的應用[J];礦山測量;2010年05期

5 高s，

本文編號：2348770