發布時間：2018-08-20 16:49

【摘要】：為了得到徑向畸變、切向畸變和非方形像元改正3種鏡頭畸變參數最優化的組合,提高航測時的像點量測精度,研究了不同畸變參數組合條件下對像點量測精度的影響。采用3種型號的鏡頭對遼寧工程技術大學北校區進行了航測,并利用Virtuozo AATPATB空三軟件測試了幾種典型組合下的航測結果精度。試驗結果表明:在條件允許的情況下,盡可能采用較為全面的畸變參數能夠最大限度地提升航測結果的精度;當條件有限時,采用K1和K2組合的模型可以消除大部分鏡頭畸變帶來的影響,對結果精度的提升最為顯著。研究成果可以為其他無人機航測任務提供參考。
[Abstract]:In order to obtain the optimal combination of three lens distortion parameters, radial distortion, tangential distortion and correction of non-square pixel, the effect of different distortion parameters on the accuracy of image point measurement is studied. The aerial survey of North Campus of Liaoning University of Engineering and Technology was carried out by using three kinds of lenses, and the accuracy of aerial survey results under several typical combinations was tested by using Virtuozo AATPATB software. The experimental results show that the accuracy of aerial survey results can be maximized by using more comprehensive distortion parameters when conditions permit, and when conditions are limited, The model combined with K1 and K2 can eliminate the influence of most lens distortion and improve the accuracy of the result. The research results can provide reference for other UAV aerial survey missions.
【作者單位】： 遼寧工程技術大學測繪與地理科學學院;中國科學院遙感與數字地球研究所;
【基金】：國家重點研發計劃(2016YFC0803102) 國家自然科學基金(41401535)
【分類號】：P231

【相似文獻】

相關期刊論文 前1條

1 馬莉,王國輝,李衛國;普通相機鏡頭畸變改正系數的測定及精度分析[J];鐵路航測;2001年02期

，

本文編號：2194323