【摘要】：槽波在遇到斷層等不連續斷面時,會產生反射并被與炮點位于同一條巷道內的檢波器接收到,據此可以探測巷道側幫地質異常發育情況。通常情況下反射槽波能量較弱,信噪比較低。為提升反射槽波信噪比,以山西陽泉煤業集團某礦201工作面為例,將包絡疊加方法應用于反射槽波探測,并通過斷層模型三維槽波數值模擬以及實際探測資料的驗證,證實了包絡疊加成像方法的有效性。
[Abstract]:When the slot wave encounters discontinuous section such as fault, it will produce reflection and be received by the geophone located in the same tunnel as the shot point, so that the geological anomaly of the side of the tunnel can be detected. In general, the energy of reflected grooves is weak and the signal-to-noise ratio is low. In order to improve the signal-to-noise ratio (SNR) of reflected grooves, the envelope superposition method is applied to the detection of reflected grooves in a coal mine of Yangquan Coal Group, Shanxi Province, as an example, and the numerical simulation of 3-D grooves in fault models and the verification of actual detection data are carried out. The effectiveness of the envelope superposition imaging method is verified.
【作者單位】： 陽泉煤業(集團)有限責任公司;
【分類號】：P631.4;TD175
，

本文編號：2174586