本文選題：界線符號 + 單元循環配置��； 參考：《測繪通報》2017年10期

【摘要】：制圖規范中要求不同界線實部相交,然而當前制圖軟件多未考慮界線相交處虛線的處理,而且國內外文獻針對實部相交的研究較少,尚未形成完整的解決方案,基于此,本文根據單元循環配置法繪制地圖線狀符號的基本思想,首先拆分原始單元塊,然后分解原始的數據圖層,最后將新單元塊和新圖層對應配置,并據此設計了自動化處理方法。通過實際數據驗證了算法的有效性和合理性,該方法顧及了不同等級、不同類別界線的差異,并通過自動化的處理方法提高了地圖編輯的效率。
[Abstract]:The drawing specification requires the intersection of real parts of different boundaries. However, most of the current drawing software do not consider the processing of dotted lines at boundary intersections, and there are few researches on the intersection of real parts in the literature at home and abroad, which have not yet formed a complete solution, based on this, In this paper, according to the basic idea of drawing map line symbols by cell cycle collocation, the original unit blocks are split first, then the original data layers are decomposed. Finally, the new unit blocks and new layers are configured accordingly, and an automatic processing method is designed accordingly. The validity and rationality of the algorithm are verified by the actual data. The method takes into account the differences of different grades and different classification boundaries, and improves the efficiency of map editing by the automatic processing method.
【作者單位】： 中國測繪科學研究院;
【基金】：國家科技支撐計劃(2015BAJ06B01) 測繪地理信息公益性行業科研專項(201512020) 中國測繪科學研究院基本科研業務費項目(7771606)
【分類號】：P283.7
，

本文編號：1983233