本文選題：網絡RTK + 誤差分析�。� 參考：《遼寧工程技術大學》2013年碩士論文

【摘要】：當前，網絡RTK技術已成為測繪領域的研究熱點之一。但，該技術在我國工程建設領域尚未普及。并且，幾乎很少對網絡RTK的技術構建和應用方面進行系統地分析對比。故而本文認為有必要對其進行研究。 文章在介紹網絡RTK技術原理的基礎上，主要對單基站網絡RTK、移動基站式網絡RTK和多基站網絡RTK的基準站建設和技術構建流程做了詳細的研究，并對比分析各自的優缺點，總結出對工程建設具有參考價值的建議。 最后，通過具體實驗研究了坐標轉換參數對測量精度的影響，，包括已知點含有微小誤差對測量精度的影響、控制網的大小不同對測量精度的影響兩部分內容。然后，又比較分析了三種形式的網絡RTK測量精度與距基準站距離的關系，在10km、20km、35km范圍內對所選的測試點進行實時動態測量，并對測試數據的測量精度進行分析比較。得出三種形式的網絡RTK在什么樣的范圍內保證5cm的測量精度。提出具有一定實際應用價值的建議。
[Abstract]:At present, network RTK technology has become one of the research hotspots in the field of surveying and mapping. However, the technology has not been popularized in the field of engineering construction in China. Moreover, few systematic analysis and comparison are made on the technical construction and application of network RTK. Therefore, it is necessary to study it in this paper. On the basis of introducing the technical principle of network RTK, this paper makes a detailed study on the base station construction and technical construction flow of single base station network, mobile base station network RTK and multi-base station network RTK, and compares and analyzes their advantages and disadvantages. The suggestions of reference value for engineering construction are summarized. Finally, the influence of coordinate conversion parameters on measurement accuracy is studied through experiments, including the influence of small errors in known points on measurement accuracy, and the influence of different control network size on measurement accuracy. Then, the relationship between the measurement accuracy of three kinds of network RTK and the distance from the reference station is compared and analyzed. The real-time dynamic measurement of the selected test points is carried out in the range of 10 km / 20 km2 / 35km, and the measurement accuracy of the test data is analyzed and compared. The range of three types of network RTK to ensure the measurement accuracy of 5cm is obtained. Some suggestions with practical application value are put forward.
【學位授予單位】：遼寧工程技術大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：P228.4

【參考文獻】

相關期刊論文 前10條

1 趙禮劍;程新文;陳性義;李英成;孫步陽;吳飛;;單基站GPS差分系統在山區線路測量中的應用探討[J];測繪科學;2008年S3期

2 高星偉;程鵬飛;秘金鐘;趙春梅;李明;祝會忠;;網絡RTK的電離層折射估算與改正[J];測繪科學;2009年03期

3 高星偉,劉經南,葛茂榮;網絡RTK基準站間基線單歷元模糊度搜索方法[J];測繪學報;2002年04期

4 沈云中;胡雷鳴;李博峰;;Bursa模型用于局部區域坐標變換的病態問題及其解法[J];測繪學報;2006年02期

5 武曉波,王世新,肖春生;Delaunay三角網的生成算法研究[J];測繪學報;1999年01期

6 王解先;;七參數轉換中參數之間的相關性[J];大地測量與地球動力學;2007年02期

7 梅生強;宮煦利;姚宜斌;王澤民;黃石磊;;基于Delaunay三角網的大規模CORS基準站組網技術研究[J];大地測量與地球動力學;2008年01期

8 劉陶勝;黃聲享;羅力;曾憲s

本文編號：1927875