本文選題：復用 + 調制��； 參考：《測繪科學》2017年05期

【摘要】：針對傳統的互復用調制方法中,8種不同的輸入信號組合值與6個不同相位量之間對應關系模糊的問題,提出了三碼八相的互復用調制方法。基于三碼八相互復用調制方法,利用與3路輸入信號相關的指數因子,推導出了新的互復用基帶調制信號表達式,實現了復用調制信號的相位翻轉,得到了8個不同的相位值。仿真結果顯示,三碼八相互復用調制方法,保證了復用調制信號的恒包絡特性,解決了輸入碼組合值與相位量之間對應關系的模糊度問題,研究結果對于GNSS組合中的信號調制有一定的參考價值。
[Abstract]:In order to solve the problem of fuzzy correspondence between 8 different input signal combinations and 6 different phase quantities in the traditional method of mutual multiplexing modulation, a three-code and eight-phase modulation method is proposed. Based on the three code 8 multiplexing modulation method and using the exponential factor related to the three input signals, a new expression of the multiplexing baseband modulation signal is derived, and the phase flip of the multiplexed modulation signal is realized, and eight different phase values are obtained. The simulation results show that the modulation method of three codes and eight multiplexing ensures the constant envelope characteristic of the multiplexed modulation signal, and solves the ambiguity problem of the corresponding relation between the input code combination value and the phase value. The research results have some reference value for signal modulation in GNSS combination.
【作者單位】： 電子科技大學電子科學技術研究院;
【分類號】：P228.4
，

本文編號：1921533