本文選題：地震預警 + 烈度速報�。� 參考：《大地測量與地球動力學》2017年12期

【摘要】：對典型的地震預警與烈度速報方法進行分析,提出了基于非對稱傳感器的地震預警與烈度速報綜合用烈度儀,其由非對稱結構的三分量傳感器和基于ARM嵌入式系統的專用數據采集器組成。經過測試,該地震烈度儀的專用數據采集器具有大于107dB的動態范圍;其非對稱三分量傳感器結構中,所選的單分量B類傳感器的加速度誤差小于0.8%,動態范圍大于105dB,而所選的三分量C類傳感器的加速度誤差小于5%,動態范圍大于61dB。該地震烈度儀的各項指標均滿足地震預警與烈度速報綜合應用的各項技術要求,且功耗低、成本低,適合于高密度布設。
[Abstract]:Based on the analysis of typical earthquake warning and intensity reporting methods, a comprehensive intensity instrument for earthquake warning and intensity reporting based on asymmetric sensors is proposed. It consists of three-component sensors with asymmetric structure and a special data collector based on ARM embedded system. After testing, it is found that the special data collector of the seismograph has a dynamic range larger than that of 107dB, and in its asymmetrical three-component sensor structure, The acceleration error of the single component B type sensor is less than 0.8, the dynamic range is more than 105 dB, while the acceleration error of the three component C type sensor is less than 5 and the dynamic range is greater than 61 dB. All the indexes of the seismometer can meet the technical requirements of the comprehensive application of earthquake warning and intensity reporting, and the power consumption is low, the cost is low, and it is suitable for high density layout.
【作者單位】： 中國地震局地殼應力研究所(地殼動力學重點實驗室);
【基金】：中央級公益性科研院所基本科研業務費專項(ZDJ2015-20) 國家自然科學基金(50908215)~~
【分類號】：P315.75
，

本文編號：1815639