本文選題：油頁巖 + 采樣長度　； 參考：《中國礦業》2017年12期

【摘要】：為確定青海油頁巖勘查過程中油頁巖的最佳采樣長度(以下簡稱"樣長"),在系統開展野外地質工作和樣品采集化驗基礎上,分析認識青海油頁巖地質特征,分別用類比法、統計學方法和試驗法,得出技術和經濟方面均合理的最大樣長。結果顯示:(1)由于油頁巖與同為固體可燃有機巖煤的宏觀識別程度、有用組分的變化過程和分布均勻程度均存在差異,所以不能完全參考煤的采樣規格;(2)通過統計分析Y-1Y和Y-6Y井油頁巖含油率正態分布類型為對數分布,與許多鉬、錫、鎢以及貴金屬礦床的典型樣品數據正態分布形態類似,可類比其樣長規格,確定油頁巖樣長為1.5~2.0m;(3)對Y-1Y井中選定的加密采樣層段含油率數據應用減稀法得出最大樣長為1.5m或1.6m。
[Abstract]:In order to determine the optimum sampling length of oil shale in Qinghai oil shale exploration process (hereinafter referred to as "sample length"), on the basis of systematic field geological work and sample collection test, the geological characteristics of Qinghai oil shale are analyzed and recognized, and the analogy method is used respectively.The maximum sample length of both technical and economic aspects is obtained by statistical and experimental methods.The results show that due to the macroscopic recognition degree of oil shale and the same solid combustible organic rock coal, the variation process and distribution uniformity of useful components are different.Therefore, the normal distribution type of oil content of oil shale in Y-1Y and Y-6Y wells is logarithmic distribution, which is similar to the normal distribution form of typical sample data of many molybdenum, tin, tungsten and precious metal deposits.The oil shale sample length is determined to be 1.5 ~ 2. 0 m ~ 3) by using thinning reduction method, the maximum sample length is 1.5 m or 1.6 m for the selected infill sampling interval oil content data in Y-1Y well.
【作者單位】： 吉林大學地球科學學院;青海省地質調查局;青海煤炭地質一五勘探隊;中國地質調查局西安地質調查中心;
【基金】：國家自然科學基金項目資助(編號:41502200;41602162) 國家科技重大專項資助(編號:2016ZX05034001-006) 青海省地勘基金項目資助(編號:2013274011kc001;2014057043kc006;2015083086kc002)
【分類號】：P618.12
，

本文編號：1743241