發布時間：2018-11-21 09:46

【摘要】：針對傳統一維空間硬件木馬檢測方法中硬件木馬產生的信息易被芯片正常工作產生的信息掩蓋、二維空間硬件木馬檢測方法成本較高精度較低的問題,提出了一種基于紅外光譜分析的硬件木馬檢測方法。該方法是一種二維空間硬件木馬檢測方法,利用紅外波波長短以及紅外光譜信息損失少的特點可以實現較高的硬件木馬檢測精度。實驗結果表明,通過擬合芯片工作時硬件木馬產生的紅外光譜并對比參數差異能檢測出邏輯能耗量量級為10-3的硬件木馬,并在一定程度上識別實現硬件木馬功能的邏輯種類。
[Abstract]:In view of the problem that the information generated by the hardware Trojan is easily masked by the information generated by the normal operation of the chip in the traditional one-dimensional space hardware Trojan detection method, the cost of the two-dimensional spatial hardware Trojan detection method is relatively high and low. A hardware Trojan horse detection method based on infrared spectrum analysis is proposed. This method is a two-dimension space hardware Trojan horse detection method, which can achieve high detection precision by using the characteristics of infrared wave length and less loss of infrared spectral information. The experimental results show that the hardware Trojan can be detected by fitting the infrared spectrum produced by the hardware Trojan and comparing with the difference of parameters. The order of energy consumption of the hardware Trojan is 10 ~ (-3) when the logic energy consumption is 10 ~ (-3). And to a certain extent to identify the realization of hardware Trojan logic.
【作者單位】： 空軍工程大學防空反導學院;國防科技大學計算機學院;
【基金】：國家自然科學基金面上項目(No.61471375)
【分類號】：TN407
，

本文編號：2346602