【摘要】：為解決印制電路板(PCB)在工作中出現的電磁兼容(EMC)問題,對采集單元PCB及屏蔽盒的EMC性能進行研究,將PCB根據功能實現分割,加粗電源線和地線的寬度,選用貼片元件,減小相鄰傳輸線間的平行長度;同時對屏蔽盒整體采用插接結構,在可拆卸面板的機箱內設計并布置防靜電金屬?gòu)椘?可增加面板與機箱其他位置的電導率、減少靜電電荷積累,以提高設備抗擾度、減少輻射騷擾。最后基于HFSS軟件,對PCB和屏蔽盒進行建模仿真,通過結果分析可得,優化后的PCB電磁場分布更均勻,屏蔽盒的屏蔽效果顯著,EMC特性得到很大程度的提高,證明對PCB和屏蔽盒的設計滿足測試要求。
[Abstract]:In order to solve the problem of electromagnetic compatibility (EMC) in the work of printed circuit board (PCB), the performance of the acquisition unit PCB and the EMC of the shield box is studied. The PCB is divided according to the function, the width of the power cord and ground wire is thickened, and the patch element is selected. Reducing the parallel length between adjacent transmission lines; At the same time, the shielding box is designed and arranged with antistatic metal shrapnel in the chassis of the removable panel, which can increase the conductivity of the panel and other locations of the case, reduce the accumulation of electrostatic charge, and improve the immunity of the equipment. Reduce radiation harassment. Finally, based on HFSS software, the modeling and simulation of PCB and shield box are carried out. The results show that the optimized PCB electromagnetic field distribution is more uniform, the shielding effect of the shield box is remarkable, and the EMC characteristics are greatly improved. It is proved that the design of PCB and shield box meets the test requirements.
【作者單位】： 大連理工大學電氣工程學院;
【基金】：國家自然科學基金(51277020) 中央高�；究蒲袠I(yè)務專向基金(DUT15ZD234)~~
【分類號】：TN03;TN41

【參考文獻】

相關期刊論文 前4條

1 楊曉西;曾翔君;任偉;侯云;郭寧寧;馬元;;智能變電站電子式互感器的誤差特性及校驗問題的研究[J];電測與儀表;2015年23期

2 劉易勇;姚斯立;馮建強;李素潔;沈s，

本文編號：2301952