發布時間：2018-09-03 14:30

【摘要】：非制冷紅外焦平面熱像儀用于人體測溫時,需要紅外熱像儀具有較高的測溫精度。而針對非制冷紅外熱像儀,隨著環境溫度以及吸收紅外輻射的增加,將會產生較為嚴重的溫度漂移現象,這會影響到紅外探測器的響應特性,從而導致測溫精度受到一定的影響。為了消除這一影響,提出了一種新的校準方法,該方法可以實現探測器溫度在10℃~50℃之間變化時對非制冷紅外熱像儀的高精度校準。同時,對該校準方法的效果進行實驗驗證。結果表明:經過校準后的紅外熱像儀,探測器溫度漂移對測溫精度的影響明顯降低。
[Abstract]:When uncooled infrared focal plane thermal imager is used for human body temperature measurement, it is necessary for infrared thermal imager to have high temperature measurement accuracy. For the uncooled infrared thermal imager, with the increase of ambient temperature and absorption of infrared radiation, there will be a more serious temperature drift phenomenon, which will affect the response characteristics of the infrared detector. As a result, the accuracy of temperature measurement is affected to a certain extent. In order to eliminate this influence, a new calibration method is proposed, which can achieve high precision calibration of uncooled infrared thermal imager when the detector temperature varies from 10 鈩，

本文編號：2220243