【摘要】：本文主要介紹了Yb3+離子摻雜雙包層光纖激光器。利用Matlab軟件對穩態下速率方程進行了分析模擬。自行優化設計了石英端帽,通過CO2光纖熔接機與光纖進行連接。實驗結果表明系統熔接端帽后明顯的改善了光纖的損傷閾值,有效的保護了光纖端面。搭建工作中心波長等于1080nm的鐿摻雜的雙包層光纖激光器,運用半導體激光二極管當作為泵浦源,諧振腔則由兩個光纖布拉格光柵構成。其他實驗裝置還包括鐿摻雜雙包層光纖、合束器、包層泵浦剝除器、水冷等器件。當前已取得最大激光輸出功率等于123W,斜率效率等于62%,激光工作的中心波長為1080nm。
[Abstract]:This paper mainly introduces Yb3 ion doped double clad fiber laser. The rate equation under steady state is analyzed and simulated by Matlab software. The quartz end cap was designed by ourselves and connected with the fiber by CO2 fiber welding machine. The experimental results show that the damage threshold of the fiber is obviously improved after the end cap is fused, and the fiber end face is effectively protected. A ytterbium-doped double-clad fiber laser with a working center wavelength equal to 1080nm is constructed. The diode is used as the pump source and the resonator is composed of two fiber Bragg gratings. Other experimental devices include ytterbium-doped double-clad fiber, beam combiner, cladding pump stripping device, water cooling device and so on. At present, the maximum laser output power is equal to 123 W, the slope efficiency is equal to 62 and the central wavelength of the laser is 1080 nm.
【學位授予單位】：長春理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TN248

【參考文獻】

相關期刊論文 前2條

1 張利明;周壽桓;趙鴻;張昆;張大勇;朱辰;梁琳;李堯;王雄飛;張浩彬;;kW級主振蕩功率放大光纖激光器輸出特性[J];強激光與粒子束;2013年08期

2 李騰龍;孫殷宏;馬毅;楊波;;kW級全光纖激光器理論與實驗研究[J];強激光與粒子束;2014年08期

相關博士學位論文 前1條

1 李麗君;雙包層光纖激光器及放大器研究[D];南開大學;2005年

相關碩士學位論文 前1條

1 江容容;摻銩雙包層光纖激光器理論和實驗研究[D];鄭州大學;2011年

，

本文編號：2145151