【摘要】：在脈沖電路設計中,需要根據實際應用的波形要求和負載特性選擇、設計其電路構型。工程設計中常用的時域波形疊加和參數掃描等波形構型設計方法存在較大局限性,難以形成對脈沖波形構型的物理本質、脈沖電路結構對負載的適應性等方面的系統認識。從分析影響脈沖波形構型的基本要素入手,從時域和頻域角度對脈沖波形構型及其電路實現方法進行系統的分析和歸納,給出時域和頻域的電路構型設計方法及相應的電路參數解算方法,使設計人員可采用解析分析方法判斷電路中元器件參數的調整方向,同時推動電路設計創新。
[Abstract]:In the design of pulse circuit, the circuit configuration should be designed according to the waveform requirement and load characteristic of practical application. The common methods of waveform configuration design such as superposition of time-domain waveform and parameter scanning in engineering design have great limitations, so it is difficult to form a systematic understanding of the physical nature of pulse waveform configuration and the adaptability of pulse circuit structure to load. Starting with the analysis of the basic factors that affect the configuration of pulse waveform, this paper systematically analyzes and summarizes the configuration of pulse waveform and its circuit realization method from the angles of time domain and frequency domain. The design method of circuit configuration in time domain and frequency domain and the corresponding calculation method of circuit parameters are given, so that designers can use analytical analysis method to judge the adjustment direction of component parameters in the circuit, and promote the innovation of circuit design at the same time.
【作者單位】： 中國工程物理研究院流體物理研究所;北京大學物理學院;
【基金】：國防基礎科研項目(B1520132002)
【分類號】：TN702
，

本文編號：2127943