本文選題：三維片上網絡 + 測試規劃��； 參考：《電子測量與儀器學報》2017年08期

【摘要】：為了提高三維片上網絡(three dimensional network-on-chip,3D NoC)測試效率,結合3D NoC測試的特點建立了一種變權時間Petri網的測試模型,設置算法權值與變遷時延相關聯,對Petri網變遷進行動態變權處理。在此基礎上,將變遷激發序列作為IP核并行測試任務規劃方案,采用簡化蝙蝠位置更新方程的改進蝙蝠算法對其進行優化求解。將蝙蝠的位置更新規則融入到Petri網進化規則中,簡化了推理過程,避免算法陷入早熟,提高了收斂速度。采用ITC’02測試基準作為實驗對象,仿真結果表明,與其他算法相比,模型可以有效的描述3D NoC測試規劃問題,最大時間優化率達到13.9%,提高了測試效率。
[Abstract]:In order to improve the efficiency of (three dimensional network-on-chip-3D-NoC (3D Noc) testing, a test model of time-varying Petri nets with variable weights is established, which sets the weights of the algorithm to be associated with the transition delay, and processes the transitions of Petri nets dynamically with varying weights. On this basis, the transition excitation sequence is used as the parallel test task planning scheme of IP core, and the improved bat algorithm which simplifies the bat location update equation is used to optimize the solution. The position update rules of bats are incorporated into the evolution rules of Petri nets, which simplifies the reasoning process, avoids the algorithm falling into precocity, and improves the convergence speed. The test results show that compared with other algorithms, the model can effectively describe the 3D Noc test planning problem, and the maximum time optimization rate reaches 13.9%, which improves the test efficiency.
【作者單位】： 桂林電子科技大學電子工程與自動化學院;西安電子科技大學機電工程學院;廣西自動檢測技術與儀器重點實驗室;桂林航天工業學院;
【基金】：國家自然科學基金(61561012) 廣西自動檢測技術與儀器重點實驗室(YQ16106) 廣西高�？茖W(xué)技術研究項目(KY2015YB110) 廣西自然科學基金(2014GXNSFAA118398)資助項目
【分類號】：TN407
，

本文編號：2066505