本文選題：濾波器 + 交叉耦合��； 參考：《南京郵電大學》2015年碩士論文

【摘要】：濾波器綜合技術是設計高性能指標微波濾波器的重要方法,但是利用該方法設計濾波器周期長,調試過程復雜,增加了濾波器研究和生產成本,濾波器診斷技術作為解決這一問題的關鍵技術得到大家的關注。本文系統的研究了廣義切比雪夫交叉耦合濾波器綜合理論和診斷技術,具體內容如下:1.給出了有耗單通帶濾波器的診斷方法,包括單通帶濾波器散射參數多項式的提取,耦合矩陣的診斷,以及無載Q值的移除和獲取方法。綜合設計并診斷了一個三階(單零點)微帶濾波器,一個三階(無零點)腔體濾波器,一個四階(雙零點)微帶濾波器,驗證了有耗濾波器診斷方法的正確性。最后利用給出的診斷方法指導調試了一個四階微帶濾波器。2.給出雙通帶濾波器綜合設計理論,并利用該理論指導設計了一個八階雙通帶濾波器。給出雙通帶濾波器診斷方法,利用雙通帶濾波器診斷方法對該八階雙通帶濾波器進行診斷,得到雙通帶濾波器的散射多項式和無載Q值,驗證了此雙通帶濾波器診斷方法的正確性。3.提出一種帶阻濾波器的診斷方法,包括帶阻濾波器散射參數多項式的提取,耦合矩陣的診斷,以及無載Q值的移除和獲得方法。利用該方法對六階帶阻濾波器電路模型和二階腔體帶阻濾波器進行診斷,驗證了該診斷方法的正確性。
[Abstract]:Filter synthesis technology is an important method to design microwave filter with high performance index. However, the method has long period and complex debugging process, which increases the research and production cost of filter. As a key technology to solve this problem, filter diagnosis technology has attracted much attention. In this paper, the synthesis theory and diagnostic technique of generalized Chebyshev cross-coupling filter are systematically studied. The concrete contents are as follows: 1. The diagnosis method of lossy unipass band filter is presented, including the extraction of scattering parameter polynomial, the diagnosis of coupling matrix, and the removal and acquisition of unloaded Q value. A third order (single zero) microstrip filter, a third order (zero free) cavity filter and a fourth order (double zero) microstrip filter are designed and diagnosed. Finally, a four-order microstrip filter. 2. The synthetic design theory of double pass band filter is presented, and an eighth-order double pass band filter is designed under the guidance of the theory. The diagnosis method of double pass band filter is given. The eighth order double pass band filter is diagnosed by double pass band filter. The scattering polynomial and unloaded Q value of double pass band filter are obtained. The correctness of the double pass band filter diagnosis method is verified. 3. A diagnosis method of bandstop filter is presented, which includes the extraction of scattering parameter polynomial, the diagnosis of coupling matrix, and the removal and acquisition of unloaded Q value. This method is used to diagnose the sixth order band-stop filter circuit model and second-order cavity band-stop filter, and the correctness of the method is verified.
【學位授予單位】：南京郵電大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TN713

【相似文獻】

相關期刊論文 前10條

1 ;網絡、濾波、濾波器[J];電子科技文摘;2000年06期

2 Richard Kurzrok;;具有低通響應的可調濾波器電路[J];電子設計技術;2001年11期

3 ;你問我答[J];電子制作;2001年03期

4 楊繼深;電源線濾波器的正確使用[J];安全與電磁兼容;2002年04期

5 ;網絡、濾波、濾波器[J];電子科技文摘;2002年11期

6 ;網絡、濾波、濾波器[J];電子科技文摘;2003年03期

7 范穎鵬,杜正偉,龔克,張肅;平面波照射下屏蔽腔內濾波器的分析[J];清華大學學報(自然科學版);2005年10期

8 劉s，

本文編號：2064085