天堂国产午夜亚洲专区-少妇人妻综合久久蜜臀-国产成人户外露出视频在线-国产91传媒一区二区三区

當前位置:主頁 > 科技論文 > 電子信息論文 >

內建自調整的仲裁器物理不可克隆函數

發布時間:2018-04-29 18:57

  本文選題:物理不可克隆函數 + 隨機性。 參考:《計算機輔助設計與圖形學學報》2017年09期


【摘要】:針對仲裁器物理不可克隆函數(PUF)響應隨機性難以保證的問題,提出具有內建自調整功能的仲裁器PUF設計,該設計包含激勵產生模塊、可調仲裁器PUF模塊和自調整模塊.首先在傳統仲裁器PUF上增加由調整信號控制的時延調節電路,實現可調仲裁器PUF結構;然后用線性反饋移位寄存器實現激勵產生模塊,生成用于測試PUF隨機性的激勵;最后加入自調整模塊,通過分析PUF響應的隨機性自動調整時延調節電路的調整信號,提高可調仲裁器PUF的隨機性.實驗結果表明,經過自調整,在FPGA上實現的多個所提仲裁器PUF,其隨機性的平均值為50.62%,標準差僅為0.5%,隨機性得到有效提高.
[Abstract]:In order to solve the problem that the randomness of the physical non-clone function of the arbiter is difficult to guarantee, a design of PUF with built-in self-adjustment function is proposed. The design includes excitation generation module, adjustable arbiter PUF module and self-adjusting module. Firstly, a time-delay adjusting circuit controlled by adjusting signal is added to the traditional arbiter PUF to realize the adjustable arbiter PUF structure, and then the excitation generation module is realized by linear feedback shift register, which is used to test the randomness of PUF. Finally, a self-adjusting module is added to improve the randomness of the adjustable arbiter PUF by analyzing the randomness of the PUF response and automatically adjusting the signal of the time-delay adjusting circuit. The experimental results show that the average randomness of the proposed arbiters implemented on FPGA is 50.62, the standard deviation is only 0.5, and the randomness is improved effectively.
【作者單位】: 中國科學院計算技術研究所計算機體系結構國家重點實驗室;中國科學院大學;
【基金】:國家自然科學基金(61532017,61432017,61376043,61521092)
【分類號】:TN791
,

本文編號:1821162

資料下載
論文發表

本文鏈接:http://sikaile.net/kejilunwen/dianzigongchenglunwen/1821162.html


Copyright(c)文論論文網All Rights Reserved | 網站地圖 |

版權申明:資料由用戶1450c***提供,本站僅收錄摘要或目錄,作者需要刪除請E-mail郵箱bigeng88@qq.com