本文選題：矩形腔體 + 多模濾波器��； 參考：《華南理工大學》2016年碩士論文

【摘要】：隨著近年來通信行業的快速發展,尤其是2013年工信部正式向三大電信運營商發放4G牌照,對通信系統提出了更高的要求。濾波器作為通信系統中的一個不可缺少的關鍵器件,不僅對通信質量有著深刻影響,更對整個通信系統的體積、成本起到制約作用,所以研究濾波器對通信行業的發展具有十分重要的理論意義和潛在的經濟價值。腔體濾波器是濾波器發展史上古老而又具有持久生命力的一種類型,憑借其高功率容量、低損耗、高Q值等優點,被廣泛地應用于數字電視廣播、衛星通信、基站等應用中,是現在通信系統中重要的組成部分之一。本文從矩形腔體濾波器入手,主要研究點和創新點在以下幾個方面:(一)設計了一系列多模帶通濾波器,該一系列濾波器的特點在于具有一對獨立可控的傳輸零點,也即是說,這兩個傳輸零點可以獨立地任意放在通帶的左側或者右側,提高了濾波器實用性。在設計過程中,解釋了不同模式被激勵的原因,對腔體濾波器的研究和拓展具有一定的指導和借鑒意義。(二)設計了一系列的多頻帶濾波器,有雙頻的,有三頻的。設計的多頻帶濾波器的特點在于結構簡單,性能良好。如果應用在通信系統中,可以減小通信系統的體積。(三)結合上面設計的多模帶通濾波器和多頻帶濾波器,設計了U型槽線下的一款多模帶通濾波器和一款三頻帶通濾波器,進一步驗證了前面的設計理論和分析過程。(四)指出了后續研究方向的可行性,為進一步深入研究矩形腔體濾波器、拓展濾波器的功能給出了一些思路和研究方向。需要指出的是,本文中設計的所有腔體濾波器中均沒有像傳統腔體濾波器那樣加入一些耦合調節元素,例如螺釘、切角等,保持了腔體的完整性,也降低了加工成本。
[Abstract]:With the rapid development of the communication industry in recent years, especially in 2013, the Ministry of Industry and Information Technology issued 4G licenses to the three major telecom operators, which put forward higher requirements for the communication system. As an indispensable key device in the communication system, filter not only has a profound impact on the communication quality, but also restricts the volume and cost of the whole communication system. Therefore, the study of filter has very important theoretical significance and potential economic value for the development of communication industry. Cavity filter is an ancient and long-lasting type of filter in the history of its development. Because of its high power capacity, low loss, high Q value and so on, it is widely used in digital television broadcasting, satellite communication, base station and so on. It is one of the important parts of communication system. In this paper, a series of multimode band-pass filters are designed in the following aspects: (1). The characteristics of this series of filters are that they have a pair of independent and controllable transmission zeros. These two transmission zeros can be placed on the left or right side of the passband independently, which improves the filter practicability. In the design process, the reasons for different modes of excitation are explained, which has a certain guiding and reference significance for the research and expansion of cavity filter. (2) A series of multi-band filters are designed, including two-frequency and three-frequency filters. The designed multiband filter is characterized by simple structure and good performance. If applied in communication system, the volume of communication system can be reduced. (3) combining the multi-mode bandpass filter and multi-band filter designed above, a multi-mode bandpass filter and a three-band pass filter are designed under the U-shaped slot line, which further verifies the design theory and analysis process. (4) the feasibility of the following research direction is pointed out, and some ideas and research directions are given for the further study of rectangular cavity filter and the expansion of the function of the filter. It should be pointed out that none of the cavity filters designed in this paper adds some coupling adjusting elements like the traditional cavity filters, such as screws, cutting angles, etc., which keep the integrity of the cavity and reduce the processing cost.
【學位授予單位】：華南理工大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TN713.5

【相似文獻】

相關期刊論文 前10條

1 龍純U，

本文編號：1794104