發布時間：2018-04-20 02:00

  本文選題：行波管 + UG��； 參考：《電子科技大學》2017年碩士論文

【摘要】：行波管作為一種高功率微波放大器件,廣泛地應用于雷達、衛星等高精尖國防領域。如何快速有效地生產高性能行波管對國防事業具有極其重要的戰略意義。然而,由于行波管的加工技術和設計周期所限,行波管具有生產周期長、造價高等特點。這一定程度上限制了行波管的廣泛應用。目前,關于行波管二維工程圖紙的生成方式,絕大部分企業沿用著傳統的手工創建生成的方式。新設計了一個性能良好的模型結構之后,都需要工程師手動繪制出該三維模型對應的二維工程圖紙,并對其關鍵尺寸逐一進行標注說明。這些過程中不可避免地包含了大量重復、瑣碎的工作,極大地降低了工作效率,同時也耗費了大量的人力資源。為解決這些問題,達到提高生產效率的目的,亟需二維圖紙的自動生成技術。本文通過C++對UG軟件進行二次開發,重點對行波管零部件尺寸如何實現自動標注進行研究,最終達到二維工程圖紙自動化生成的目的。本文首先結合相關專家學者對尺寸自動標注方面的研究成果,提出了基于模型棱邊尺寸的自動化標注方案。通過相應的UG/OPEN API函數創建指定圖幅大小的圖紙載體,并導入三維模型的視圖信息。然后獲取模型的棱邊并按其棱邊類型和方向對其進行分類和簡單的去重操作,接著在對應的視圖上對需要標注的棱邊進行尺寸標注。最后為圖紙加上圖框和明細欄部件,并對明細欄的部分關鍵信息進行自動填寫,最終得到完整的二維工程圖紙。本文主要運用計算機高級語言實現圖紙自動生成,這種方式不具有普適性。為了方便廣大用戶對本課題成果的使用,本文自定義了一套淺顯易懂、上手迅速的上層偽代碼。該偽代碼主要由特定的英文關鍵詞和數字信息組成。通過讀取該偽代碼組成的文件來實現圖紙的自動生成。用戶在使用過程中只需要編寫相應的偽代碼文件就可以實現指定功能,具有很強的靈活性。最后,本文對行波管無柵電子槍部件的關鍵尺寸進行誤差分析。通過MTSS對其進行仿真計算,得到相應尺寸對該結構性能影響較小的尺寸誤差范圍。
[Abstract]:As a kind of high power microwave amplifier, TWT is widely used in radar, satellite and so on. How to produce high performance TWT quickly and effectively is of great strategic significance to national defense. However, due to the limited processing technology and design cycle of TWT, TWT has the characteristics of long production cycle and high cost. To some extent, the application of TWT is limited. At present, most enterprises use the traditional manual creation method to generate the 2D engineering drawings of TWT. After the new design of a model structure with good performance, it is necessary for engineers to manually draw the 2D engineering drawings corresponding to the 3D model, and to annotate the key dimensions one by one. These processes inevitably involve a large number of repetitive and trivial tasks, which greatly reduce the efficiency of work and consume a lot of human resources. In order to solve these problems and improve production efficiency, the automatic generation of 2D drawings is urgently needed. In this paper, UG software is redeveloped by C, and how to realize automatic dimensioning of TWT parts is studied in order to achieve the goal of automatic generation of 2D engineering drawings. In this paper, an automatic dimensioning scheme based on model edge dimension is proposed based on the research results of relevant experts and scholars. The corresponding UG/OPEN API function is used to create the drawing carrier with specified drawing size and to import the view information of the 3D model. Then the edges of the model are obtained and classified according to the type and direction of the edges. Then the edges that need to be labeled are dimensioned on the corresponding view. Finally, the drawing frame and detail bar parts are added to the drawing, and some key information of the detail column are automatically filled in, finally the complete two-dimensional engineering drawings are obtained. This article mainly uses the computer advanced language to realize the drawing automatic generation, this kind of way does not have the universality. In order to facilitate the users to use the results of this subject, this paper defines a simple and easy to understand, rapid use of the upper pseudo code. The pseudo code is mainly composed of specific English keywords and digital information. By reading the pseudo code composed of files to achieve the automatic generation of drawings. Users only need to write the corresponding pseudo code files in the process of use to achieve the specified function, which has a strong flexibility. Finally, the error analysis of the key dimensions of the traveling wave tube (TWT) without grating electron gun is carried out. Through the simulation of the structure by MTSS, the dimension error range of the structure is obtained, which has less influence on the performance of the structure.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TN124

【參考文獻】

相關期刊論文 前10條

1 林越;王翠珍;;淺談面向對象開發思想與軟件設計架構分析[J];信息通信;2016年03期

2 羅易彬;唐紅濤;劉雪紅;郭順生;;基于UG宏與二次開發的工程圖尺寸自動標注方法研究[J];模具工業;2015年07期

3 徐璇;姜明新;黃靜;徐晶;李敏;;基于MFC的工程軟件界面設計[J];電子設計工程;2011年21期

4 車忠志;孫雪雁;;MFC應用程序基本框架分析[J];農業網絡信息;2010年09期

5 周敏,鄧學雄,陳君梅;UG二次開發技術及其應用[J];工程圖學學報;2005年05期

6 佘晶,黃翔;特征尺寸自動標注方法的研究及實現[J];機械制造與自動化;2005年01期

7 袁媛;基于MFC類設計ObjectARX應用程序界面[J];中南大學學報(自然科學版);2004年03期

8 王恒,寧汝新,張旭,王鐵;利用MFC二次開發Pro/E[J];計算機輔助設計與圖形學學報;2004年06期

9 李發根;李國祿;李海鵬;邱建新;丁雷;;基于UG的標題欄和明細表自動生成技術的研究[J];金屬成形工藝;2004年01期

10 鐘元,劉勝青,羅陽,查雪梅;Pro/E調用MFC對話框技術[J];機械;2003年01期

相關碩士學位論文 前7條

1 陳聰;行波管結構設計及加工誤差分析[D];電子科技大學;2016年

2 梁田;行波管關鍵工藝技術研究[D];電子科技大學;2016年

3 盧Y，

本文編號：1775710