本文選題：紅外仿真 + 紅外景象生成　； 參考：《紅外與激光工程》2017年04期

【摘要】：針對紅外半實物仿真試驗中DMD紅外景象仿真設備存在的時序同步、高幀頻顯示、光學匹配等使用問題,設計與研制了一套能夠與常見被測紅外凝視成像設備匹配使用的基于DMD的紅外景象仿真設備。首先提出了合理可行的同步延時驅動方案和顯示控制方案,設計與研制了同步信號處理電路和驅動電路,實現了仿真圖像的時序同步和高幀頻顯示;其次根據常見被測紅外凝視成像設備的光學參數,進行了光學系統設計與仿真,研制了照明光學系統和投影光學系統,實現了與常見被測紅外凝視成像設備光學匹配。檢測結果表明:該設備能夠與多種被測紅外凝視成像設備在時序上保持同步,并實現光學匹配,輸出的仿真圖像幀頻可達300 Hz、最大可模擬溫度為160℃、最小可模擬溫差為0.03℃、最大圖像對比度為0.7、空間非均勻性優于1%,已在紅外半實物仿真試驗中發揮了巨大作用。
[Abstract]:Aiming at the problems of timing synchronization, high frame rate display and optical matching of DMD infrared scene simulation equipment in infrared hardware-in-the-loop simulation test,An infrared scene simulation equipment based on DMD is designed and developed, which can match the common infrared staring imaging equipment.Firstly, a reasonable and feasible synchronous delay drive scheme and display control scheme are proposed. The synchronous signal processing circuit and driving circuit are designed and developed. The timing synchronization and high frame rate display of the simulation image are realized.Secondly, according to the optical parameters of the common infrared staring imaging equipment, the optical system design and simulation are carried out, and the illuminating optical system and the projection optical system are developed, and the optical matching with the common infrared staring imaging equipment is realized.The test results show that the device can synchronize with various infrared staring imaging devices and achieve optical matching. The output simulation image frame frequency can reach 300 Hz, the maximum simulated temperature is 160 鈩，

本文編號：1761062