本文選題：帶隙基準 + 指數曲率補償��； 參考：《固體電子學研究與進展》2016年01期

【摘要】：為了滿足市場對寬溫度范圍、高精度帶隙基準電壓源的需求,本文設計制作了一種新型帶隙基準電壓電路。設計采用多點曲率補償技術,在溫度較低時采用指數頻率補償,高溫時采用亞閾值指數曲率補償。采用電壓-電流轉換器對分段補償電流在輸出端進行整合,進而在-55~150℃的溫度范圍內進行補償,得到低溫度系數的基準電壓。設計的電路采用CSMC 0.5μm CMOS工藝驗證,結果表明:5V電源電壓下,輸出1.25V的基準電壓;在-55~150℃的溫度范圍內溫度系數為2.5×10~(-6)/℃,在低頻時,PSRR為-66dB。帶隙基準電壓源芯片面積為0.40mm×0.45mm。
[Abstract]:In order to meet the market demand for wide temperature range and high precision bandgap voltage reference, a new band-gap voltage reference circuit is designed and fabricated in this paper.The multi-point curvature compensation technique is used in the design, the exponential frequency compensation is used when the temperature is low, and the subthreshold exponential curvature compensation is used at high temperature.The voltage-current converter is used to integrate the piecewise compensation current in the output, and then the reference voltage with low temperature coefficient is obtained by compensating in the temperature range of -55 ~ 150 鈩，

本文編號：1755854