本文選題：光彈調制器　切入點：壓電石英　出處：《壓電與聲光》2017年05期

【摘要】：研究了長度伸縮振動的光彈調制器的工作原理并進行振動分析。各向異性的壓電石英在驅動電壓下振動,當驅動方波信號頻率與兩塊晶體的本征頻率相匹配時,與壓電石英用硅橡膠柔性連接的熔融石英隨之共振,在兩塊晶體中傳播的是同頻率的縱駐波,光彈調制器整體作一維長度伸縮振動。將光彈調制器的振動等效為有阻尼的彈簧-質量塊系統進行理論推導,得出振幅表達式,振動位移與驅動電壓和光彈調制器的品質因數Q值成正比。最后通過有限元仿真與測振實驗測量自制的光彈調制器的振動特性來驗證推導的正確性。
[Abstract]:The working principle and vibration analysis of photoelastic modulator for length stretching vibration are studied. The anisotropic piezoelectric quartz vibrates under the driving voltage when the driving square wave signal frequency matches the intrinsic frequency of the two crystals. Fused quartz, which is flexibly connected with piezoelectric quartz with silicone rubber, resonates and propagates a longitudinal wave of the same frequency in two crystals. The whole photoelastic modulator makes one-dimensional length stretching vibration. The vibration of photoelastic modulator is equivalent to a damped spring-mass block system, and the amplitude expression is obtained. The vibration displacement is proportional to the driving voltage and the quality factor Q of the photoelastic modulator. Finally, the vibration characteristics of the self-made photoelastic modulator are measured by finite element simulation and vibration measurement experiment to verify the correctness of the derivation.
【作者單位】： 北京航空航天大學儀器科學與光電工程學院慣性技術重點實驗室;
【基金】：國家自然科學基金資助項目(61227902) 航天支撐技術基金資助項目
【分類號】：TN761

【相似文獻】

相關期刊論文 前5條

1 徐建東，劉樹田，楊昆，，楊淼，李淳飛;熔融石英的電暈極化及其二次諧波產生[J];中國激光;1996年09期

2 劉雪明,張明德,孫小菡;熔融石英的熱及電場誘導模型[J];物理學報;2000年03期

3 單耀瑩;趙江山;李慧;王倩;沙鵬飛;周翊;周軍;袁志軍;張海波;樓祺洪;;熔融石英棱鏡在準分子激光光譜控制系統中的應用研究[J];中國激光;2013年04期

4 王順權;周常河;茹華一;張妍妍;;深刻蝕高密度熔融石英光柵[J];中國激光;2006年02期

5 程奇,之己;應用在遠紫外的 CaF_2[J];光電子技術與信息;2000年01期

本文編號：1691752