本文選題：測控系統　切入點：數字應答機　出處：《電訊技術》2017年05期

【摘要】：針對數字應答機中相參轉發的技術問題,提出了改變直接數字頻率合成(DDS)頻率控制字或相位累加器溢出值實現相參轉發的方法,并對轉發性能、資源需求進行了分析比較,結果表明,在同等條件下改變相位累加器溢出值的方法性能稍優,但消耗的邏輯資源顯著減少。該方法將DDS溢出值設置為與轉發比相關的常數,避免了利用乘法器進行實時運算的過程,能有效實現高精度轉發,且消耗資源少,轉發比可任意設置。該方法已成功在多個工程中應用,滿足測量系統精度的要求。
[Abstract]:According to the technical problems of forwarding coherent digital answering machine, put forward to change the direct digital frequency synthesis (DDS) frequency control word or the phase accumulator overflow value realization method of coherent forwarding, and the forwarding performance, resource requirements were analyzed and compared. The results show that under the same conditions change the phase accumulator overflow value slightly better performance however, the logic of resource consumption decreased significantly. The DDS value is set to overflow and forwarding ratio constant, avoid the process of real-time operation using a multiplier, can achieve high accuracy and less consumption of resources, forwarding, forwarding can be set arbitrarily. This method has been successfully applied in many projects, meet the measurement the precision of the system requirements.

【作者單位】： 中國西南電子技術研究所;
【分類號】：TN741;TN791

【相似文獻】

相關期刊論文 前4條

1 張長源;;國際通信衛星Ⅲ號的星上通信設備 通信、遙測和指令分系統[J];電訊技術;1975年05期

2 黎孝純,孫彤,朱舸,薛麗;調頻調相應答機距離零值測量的理論和實踐[J];空間電子技術;2000年04期

3 李超;史忠科;;基于FPGA的S模式應答機設計[J];計算機工程與應用;2013年13期

4 ;[J];;年期

，

本文編號：1681018