本文選題：發光二極管(LED)　切入點：散熱器　出處：《半導體技術》2017年02期

【摘要】：針對設計出來的諸多結構樣式LED散熱器的具體選用問題,提出了一種對比選用方法。以一個LED光源的散熱為基準,闡述了對其中3款散熱器的選用過程。用Solidworks軟件建立光源并采用第一款散熱器的模型,用實測結果對用工程流體動力學(EFD)熱模擬的結果進行驗證。以第一款散熱器的熱阻和光源基板的均溫為散熱基準,對另兩款散熱器在原尺寸的基礎上按逐步增加0.1倍的方式進行整體放大,在達到散熱基準時對三者進行對比。結果表明,散熱基準為熱阻15.20 K/W、基板均溫42.42℃,款式二、款式三散熱器在整體放大1.38倍和1.35倍時與基準最為接近,熱阻相差不超過1.5%、均溫相差不超過0.1%。此時三者重量相近,款式三的占據空間最小,款式二的可操作面積最大。運用此方法可對各種結構樣式的LED散熱器進行對比選用。
[Abstract]:In view of the specific selection of many structural LED radiators, a method of comparison and selection is put forward, which is based on the heat dissipation of a LED light source. The selection process of three radiators is described. The light source is built with Solidworks software and the model of the first radiator is adopted. The results of thermal simulation with engineering fluid dynamics (EFDs) are verified by the measured results. The heat resistance of the first radiator and the average temperature of the light source substrate are taken as the radiating datum. On the basis of the original size, the other two radiators are amplified by a gradual increase of 0.1 times, and compared with each other when the heat dissipation standard is reached. The results show that the heat dissipation standard is 15.20 KW, the average temperature of the substrate is 42.42 鈩，

本文編號：1673641