本文選題：光學設計　切入點：自由曲面　出處：《激光與光電子學進展》2017年05期 　論文類型：期刊論文

【摘要】：提出一種設計自由曲面輪廓的方法以實現目標面特定區域照度均勻性為常數的目標,該方法可應用于漫反射曲面間接照明系統。基于理想漫反射曲面和發光二極管朗伯特性,推導了目標面照度分布函數的方程組。求解方程組得到曲面面型數據,繞軸旋轉得到漫反射自由曲面。根據目標面照明情況建立評價函數用于優化求解陣列間距。對系統用TracePro軟件進行非序列光線追跡仿真,仿真結果表明漫反射自由曲面間接照明目標面大小為50mm圓形區域,照明距離為200mm,均勻度達到91.5%,效率為6.73%。對比間距優化的線性陣列、環形陣列和矩形陣列下的漫反射自由曲面間接照明與直射照明,漫反射間接照明照度均勻性更高。仿真結果驗證了方案的正確性和有效性。
[Abstract]:In this paper, a method of designing free-form surface contours is proposed to achieve the objective of constant illumination uniformity in a specific area of the target surface. The method can be applied to the indirect illumination system of diffuse reflection surface. Based on the ideal diffuse surface and Lambert characteristic of light-emitting diode (LED), a new method is proposed. The equations of the illumination distribution function of the target surface are derived, and the surface data are obtained by solving the equations. The diffuse reflection free-form surface is obtained by rotating around the axis. According to the illumination of the target surface, an evaluation function is established to optimize the array spacing. The system is simulated with TracePro software for non-sequential ray tracing. The simulation results show that the target surface size is 50mm circular area, the illumination distance is 200mm, the uniformity is 91.5, the efficiency is 6.73.Contrasting the linear array with optimized spacing, the simulation results show that the target surface is 50 mm circular, the illumination distance is 200 mm, the uniformity is 91.5 mm and the efficiency is 6.73. The diffuse surface indirect illumination and direct illumination under circular and rectangular arrays are more uniform. The simulation results show that the scheme is correct and effective.
【作者單位】： 華東交通大學電氣與自動化工程學院;
【基金】：國家自然科學基金(51305137) 江西省科技支撐計劃項目(20151BBE50116) 江西省杰出青年資助計劃(20162BCB23047) 江西省發明專利產業化重點項目(20161BBM26037)
【分類號】：TN312.8

【相似文獻】

相關期刊論文 前10條

1 沈華;李嘉;朱日宏;榮四海;;基于點源陣列的自由曲面非零位干涉檢測系統設計方法[J];光學學報;2013年12期

2 逄永濤;張愛武;;自由曲面三維激光測量系統設計與開發[J];系統仿真學報;2008年S1期

3 程發超;牛麗紅;蘇秉華;蘇禹;;基于微分方程數值解的自由曲面透鏡的設計[J];光學技術;2013年03期

4 于莉媛;;LED路燈自由曲面二次光學透鏡的設計[J];能源與節能;2011年09期

5 張成亮;;一種實現LED均勻圓斑照明透鏡的自由曲面設計[J];電子科技;2014年09期

6 樊露青;李湘寧;王瑜;劉杰;;基于自由曲面的LED全反射準直透鏡的設計[J];應用光學;2013年02期

7 朱進;高志山;袁群;葉井飛;張聰e，

本文編號：1618437