本文選題：局部無熱化　切入點：高變倍比　出處：《激光與紅外》2017年01期 　論文類型：期刊論文

【摘要】：針對紅外連續變焦系統受溫度影響導致變焦曲線變化、調焦補償復雜等問題,分析了溫度變化時系統各組件的相互關系,提出一種新的無熱化方法,通過變倍組和補償組的局部無熱化設計,使系統僅通過變倍組和補償組的線性平移就能對溫度影響進行補償,變焦曲線不需改變,降低了調焦機構的控制難度。采用該方法設計了12倍中波紅外連續變焦系統,通過局部無熱化設計,僅通過一組變焦曲線以及隨溫度的線性平移,實現在25~300 mm焦距范圍、-45~50℃的全溫度范圍在30 lp/mm的MTF在0.3左右,接近衍射極限水平。具有連續變焦、高變倍比、變焦曲線無熱化、分辨率高、結構簡單、控制系統簡化等優點。
[Abstract]:Aiming at the problems such as the change of zoom curve caused by temperature and the complexity of focusing compensation in infrared continuous zoom system, this paper analyzes the interrelation of various components of the system when the temperature changes, and puts forward a new non-thermal method. Through the local non-thermal design of the variable power group and the compensation group, the system can compensate the temperature effect only by the linear translation of the variable power group and the compensation group, and the zoom curve does not need to change. The control difficulty of focusing mechanism is reduced. Using this method, a 12 times infrared continuous zoom system is designed. By means of local non-thermal design, only one set of zoom curves and linear translation with temperature are adopted. The MTF with a full temperature range of 30 lp/mm and 50 鈩，

本文編號：1583544