本文選題：CCD　切入點：驅動電路　出處：《電子器件》2017年01期 　論文類型：期刊論文

【摘要】：CCD驅動電路的設計是實現CCD各種設計功能的關鍵性因素,只有對其驅動信號設計的嚴格把關,才會進一步保證CCD器件后續工作的開展。分析線陣CCD器件TCD1703C的驅動時序要求,采用QuartusⅡ軟件,選用Verilog HDL語言設計了各路驅動時序信號。將程序設計下載到FPGA器件中,通過邏輯分析儀對輸出信號進行了波形監測,驗證了線陣CCD的驅動時序設計的可行性。將產生的驅動時序信號接入CCD器件,不同光照入射的條件下,CCD在驅動信號的驅動下,正常工作并輸出了相應的視頻信號。
[Abstract]:The design of CCD drive circuit is the key factor to realize all kinds of design functions of CCD. Only by strictly checking the design of its driving signal can the following work of CCD device be further ensured. The driving timing requirements of linear CCD device TCD1703C are analyzed. The driver timing signals are designed by using Quartus 鈪，

本文編號：1569410