【摘要】：正近日,臺達推出多功能電力監測儀表DPM-C530A。這款電力監測儀表針對工業、公共設施、樓宇等電力監控與節能需求而設計,可精確測量各種電力參數及功率因素、諧波、電流電壓不平衡度等電力質量參數,進行越限報警和數據記錄,提供強大的通信及監控功能,特別適用于對電力質量、設備精密度要求較高的場合。臺達多功能電力監測儀表DPM-C530A系列利用網絡將所有用電信息及時、準確地反饋到控制中心,進而便于用戶管控用電量,降低用電成本,隨時監控了解系統各個環節的情況,因此能避免發生重大故障而造成嚴重?fù)p失。
[Abstract]:Recently, Taida launched a multifunctional power monitoring instrument DPM-C530A. This electric monitoring instrument is designed for industrial, public facilities, buildings and other power monitoring and energy saving demands. it can accurately measure all kinds of power parameters and power factors, harmonics, current and voltage imbalance and other power quality parameters, alarm and data recording over the limit, and provide powerful communication and monitoring functions, especially suitable for situations with high requirements for power quality and equipment precision. The DPM-C530A series of Taida multifunctional power monitoring instrument makes use of the network to feed back all the power consumption information to the control center in time and accurately, so that it is convenient for the user to control the electricity consumption, reduce the cost of electricity consumption, monitor and understand the situation of each link of the system at any time, so it can avoid the serious loss caused by the occurrence of major faults.
【分類號】：TM930

【相似文獻】

相關期刊論文 前10條

1 劉均平,潘笑;鍋爐一次風速監測儀表的改進方案[J];湖北電力;2001年05期

2 朱祖濤,茅大鈞,毛靜濤;新型電力監測儀表及設計基礎[J];上海電力學院學報;2001年03期

3 汪家銘;新型監測儀表[J];發電設備;1992年01期

4 葉江祺;;HZ-8500系列監測儀表及其安裝[J];電力建設;1993年12期

5 汪家銘;;設備故障診斷儀器簡介四則[J];設備管理與維修;1991年11期

6 劉均平,潘笑;鍋爐一次風速監測儀表的改進方案[J];現代科學儀器;2002年03期

7 白建明;;監測儀表的配置和集中管理的合理性[J];城鎮供水;2008年04期

8 ;IEEE497-2010核電廠事故監測儀表準則[J];核標準計量與質量;2011年04期

9 鄧進軍;;DHT—B型電子恒功調節器監測儀表的使用和改進[J];內燃機車;1993年02期

10 黃勤烈;簡熙秀;;大型旋轉機械BENTLY監測儀表四例故障的分析與處理[J];化工自動化及儀表;1989年03期

，

本文編號：2517512