【摘要】：以廢舊磷酸鐵鋰動力電池正極材料為主要原料,采用傳統固相法制備得到Li Fe PO4正極材料。采用X射線衍射光譜(XRD)、掃描電子顯微鏡(SEM)對其結構、形貌進行表征。用電池測試系統對其電化學性能進行了研究。結果表明,廢舊Li Fe PO4正極材料在550℃氮?dú)鈿夥障伦茻? h除粘結劑后,添加少量原料調節碳含量,可制備結晶度較高的橄欖石結構Li Fe PO4。材料的晶型完整,外形為類球形,平均粒徑約10μm。碳含量為5%的樣品具有最佳的電化學性能,對應樣品在0.1 C下的首次放電比容量為148.0 m Ah/g,1 C下放電循環50次,放電容量達到初始容量的98.9%,具有良好的高倍率充放電循環性能,適合大規模工業推廣。
[Abstract]:Li Fe PO4 cathode material was prepared by traditional solid phase method with waste lithium iron phosphate power battery cathode material as main raw material. The structure and morphology were characterized by X-ray diffraction (XRD),) scanning electron microscope (SEM). The electrochemical properties of the battery test system were studied. The results show that olivine structure Li Fe PO4. with high crystallization can be prepared by burning waste Li Fe PO4 cathode material in nitrogen atmosphere at 550 鈩，

本文編號：2506135