除濕技術在變電設備運行中的應用
[Abstract]:A large number of cabinet equipment in power system has moisture-proof problems, and excessive humidity brings great harm to the safe operation of the equipment. In the face of equipment such as outdoor terminal box, switchgear and terminal box of substation, which have narrow internal space and high drying degree, the effect of traditional dehumidification drying method is not good, so it is urgent to have an effective dehumidification solution for power box cabinet. In this paper, the excessive humidity in the power box cabinet leads to the insulation decline, and even leads to the insulation breakdown and discharge failure of the equipment, which affects the stable operation and reliable power supply of the power equipment. This paper analyzes that the traditional dehumidification method can not effectively dehumidify the interior of the power box cabinet, and gives the technical characteristics of dehumidification by using the refrigeration principle. According to the principle of refrigeration dehumidification technology, based on the (Peltier) effect of semiconductor material thermoelectric refrigeration technology and its field application requirements, a semiconductor refrigeration dehumidifier, including semiconductor refrigeration, is developed. The selection of semiconductor devices, the working mode of dehumidifier and the control algorithm are designed in three parts, such as control and air circulation. The developed semiconductor dehumidifier is applied to high voltage cabinet and terminal box respectively, and the automatic working mode of "humidity over limit start delay" is adopted, and the necessary drainage pipes are taken into account, and good results are obtained. In this paper, the dehumidification technology of field operation equipment is improved, and the semiconductor refrigeration dehumidification technology of "gas-water separation" is introduced into the substation cabinet equipment, which effectively reduces the air humidity in the cabinet and reduces the risk of equipment failure and explosion caused by excessive humidity. The safe and stable operation level and reliable power supply capacity of the equipment have been improved, and a large number of applications have been made in Jiangsu power system, which has achieved remarkable results and has high economic benefits and popularization value.
【學位授予單位】:東南大學
【學位級別】:碩士
【學位授予年份】:2015
【分類號】:TM63
【相似文獻】
相關期刊論文 前10條
1 鄭毅;袁衛星;王海;袁修干;;內冷卻緊湊式固體除濕器實驗研究[J];北京航空航天大學學報;2006年09期
2 喻李葵;曹峰;;結構參數對液體除濕器性能的影響[J];建筑熱能通風空調;2008年02期
3 ;轉輪式除濕器[J];建筑結構;1973年03期
4 ;轉輪式除濕器[J];建筑技術通訊;1973年03期
5 ;轉輪式除濕器[J];建筑技術通訊;1973年03期
6 張村,施明恒;三種太陽能液體除濕空調系統除濕器的比較[J];能源研究與利用;2002年06期
7 晉海;日本家用除濕器行業最近動態[J];家電科技;2004年10期
8 劉曉茹,袁衛星,于志強;內冷卻緊湊式叉流除濕器性能數值模擬與分析[J];太陽能學報;2005年01期
9 劉曉華,江億,曲凱陽,陳曉陽;叉流除濕器中溶液與空氣熱質交換模型[J];暖通空調;2005年01期
10 柳建華;顧衛國;路陽;;液體除濕器的數值模擬分析[J];暖通空調;2006年06期
相關會議論文 前8條
1 殷勇高;張小松;賴融冰;李秀偉;;兩種鹽溶液除濕器的建模與對比研究[A];制冷空調新技術進展——第四屆全國制冷空調新技術研討會論文集[C];2006年
2 薛殿華;滕樹葉;;片狀式硅膠除濕器的試驗研究[A];全國暖通空調制冷1998年學術文集[C];1998年
3 田浩;張海強;劉曉華;常曉敏;;溶液除濕器研究綜述[A];全國暖通空調制冷2008年學術年會論文集[C];2008年
4 王瑾;張漢華;張廣麗;安守超;;填料塔除濕器性能影響因素的實驗研究[A];全國暖通空調制冷2006年學術年會論文集[C];2006年
5 尚瑩;由世俊;趙春雨;尤占平;;金屬填料型吸收式除濕器除濕性能研究[A];全國暖通空調制冷2008年學術年會論文集[C];2008年
6 柳建華;鄔志敏;丁育紅;顧衛國;;液體除濕空調除濕器性能的實驗研究[A];上海市制冷學會2005年學術年會論文集[C];2005年
7 羅磊;張小松;;內冷除濕器中熱質交換過程的數值模擬與分析[A];第五屆全國制冷空調新技術研討會論文集[C];2008年
8 杜斌;施明恒;;太陽能液體除濕空調變工況穩態運行數值模擬[A];制冷空調新技術進展——第四屆全國制冷空調新技術研討會論文集[C];2006年
相關重要報紙文章 前1條
1 楊保利 本報特約記者 嚴德勇;海島官兵告別“為濕煩惱”[N];解放軍報;2008年
相關碩士學位論文 前9條
1 周斌全;除濕技術在變電設備運行中的應用[D];東南大學;2015年
2 林彥川;空調用填料除濕器性能的模擬研究[D];內蒙古科技大學;2011年
3 唐開;蜂窩固體除濕器的制備及數值模擬[D];華南理工大學;2013年
4 馬福多;空調用金屬填料型吸收式除濕器除濕性能研究[D];天津大學;2007年
5 牛梅梅;一種內冷型溶液除濕器的理論和實驗研究[D];浙江大學;2014年
6 章秋平;開式發生器及除濕器內傳熱傳質規律研究[D];大連理工大學;2005年
7 楊慧華;垂直下降薄液膜吸收過程數值模擬[D];山東建筑大學;2013年
8 田龍舟;吸收式除濕工藝研究[D];北京化工大學;2008年
9 李獻偶;干燥劑除濕換熱器強化除濕性能研究[D];上海交通大學;2011年
,本文編號:2490254
本文鏈接:http://sikaile.net/kejilunwen/dianlilw/2490254.html