【摘要】：介紹了IEC 61968國際標準和國內相關國家標準、電力行業標準及電網公司企業標準的最新發展動態;總結了當前國內外互操作試驗成果與存在的問題;提出了基于IEC 61968標準化設計、測試與運行管控三個環節的互操作體系構建思路,將互操作建設總結為業務、功能、信息、通信及組件五個互操作層的建設,重點探討了互操作設計、測試與運行管控技術和實現方法,以保障互操作體系任意標準化環節的"即插即用",從而提升電力系統的互操作能力與水平。
[Abstract]:This paper introduces the latest development trend of IEC 61968 international standard, relevant national standard, electric power industry standard and enterprise standard of power grid company, summarizes the achievements and existing problems of interoperability test at home and abroad. In this paper, the idea of constructing interoperability system based on IEC 61968 standardization design, test and operation control is put forward. The interoperation construction is summarized as the construction of five interoperability layers: business, function, information, communication and component. The interoperation design, test and operation control technology and implementation method are discussed in order to ensure the "plug and play" of any standardized link of the interoperability system, so as to improve the interoperability ability and level of the power system.
【作者單位】： 南瑞集團公司;國電南瑞科技股份有限公司;
【分類號】：TM76

【相似文獻】

相關期刊論文 前8條

1 賀春;張冉;;IEC 61850國際互操作試驗經驗總結[J];電力系統自動化;2012年02期

2 何衛;王永福;繆文貴;張祥文;楊玲;俞奇琦;;IEC 61850深層次互操作試驗方案[J];電力系統自動化;2007年06期

3 陳炯聰;高新華;潘t，

本文編號：2468550