中高壓鏈?zhǔn)絊VG控制策略
發布時間:2019-02-12 15:15
【摘要】:為使靜止無功發生器(static var generator,SVG)具備無功、諧波及不對稱電流的綜合補償能力,對中高壓鏈?zhǔn)絊VG的控制策略進行了研究�;谶x擇性諧波補償策略提出了利用同步旋轉坐標變換及離散傅里葉變換(discrete fouries transform,DFT)相結合的SVG指令電流檢測方法,應用載波層疊脈寬調制(pulse width modulation,PWM)實現指令電流跟蹤控制,針對載波層疊PWM方法采用基于逆變橋自身能量平衡原理的軟件方法實現直流側電容電壓均衡控制。該控制策略方法簡便,運算量較小,便于工程實現,仿真和實驗驗證證明了其有效性。
[Abstract]:In order to make the static Var Generator (static var generator,SVG) have the comprehensive compensation ability of reactive power, harmonic and asymmetrical current, the control strategy of MHV chain SVG is studied. Based on the selective harmonic compensation strategy, a SVG instruction current detection method based on synchronous rotation coordinate transform and discrete Fourier transform (discrete fouries transform,DFT) is proposed. The carrier stacked pulse width modulation (pulse width modulation,) is applied to detect the current. PWM) is used to realize the command current tracking control. For the carrier stacked PWM method, the DC side capacitor voltage equalization control is realized by using the software method based on the energy balance principle of the inverter bridge itself. The control strategy is simple and easy to implement. The simulation and experimental results show that it is effective.
【作者單位】: 中國礦業大學信息與電氣工程學院;
【基金】:高等學校博士學科點專項科研基金(20110095110014)~~
【分類號】:TM761.12
[Abstract]:In order to make the static Var Generator (static var generator,SVG) have the comprehensive compensation ability of reactive power, harmonic and asymmetrical current, the control strategy of MHV chain SVG is studied. Based on the selective harmonic compensation strategy, a SVG instruction current detection method based on synchronous rotation coordinate transform and discrete Fourier transform (discrete fouries transform,DFT) is proposed. The carrier stacked pulse width modulation (pulse width modulation,) is applied to detect the current. PWM) is used to realize the command current tracking control. For the carrier stacked PWM method, the DC side capacitor voltage equalization control is realized by using the software method based on the energy balance principle of the inverter bridge itself. The control strategy is simple and easy to implement. The simulation and experimental results show that it is effective.
【作者單位】: 中國礦業大學信息與電氣工程學院;
【基金】:高等學校博士學科點專項科研基金(20110095110014)~~
【分類號】:TM761.12
【參考文獻】
相關期刊論文 前9條
1 何英杰;鄒云屏;黃柱;張玉成;;基于瞬時無功功率理論的改進諧波檢測算法[J];電網技術;2007年06期
2 唐蕾;陳維榮;;瞬時無功功率理論坐標變換的推導及諧波電流檢測原理分析[J];電網技術;2008年05期
3 唐杰;王躍球;劉麗;李海娜;;配電網靜止同步補償器的自抗擾控制[J];電網技術;2012年01期
4 孟s,
本文編號:2420549
本文鏈接:http://sikaile.net/kejilunwen/dianlilw/2420549.html
最近更新
教材專著