【摘要】：當電網發生強迫功率振蕩時,快速找到擾動源并將其切除,對保障電網的安全穩定運行具有重要意義。電網中強迫功率振蕩引起的機電擾動會沿著輸電線路在電網中傳播,根據傳播到不同位置的擾動波形具有時間延遲的特點,提出了一種利用最小均方時延估計法定位擾動源的方法。利用二次差分法檢測強迫功率振蕩起振后,通過計算關鍵母線頻率出現擾動波形的時差和先后次序,分析擾動傳播的順序,從而確定擾動源的位置。該方法只需要廣域測量信息,可以實現在線應用。四機兩區域系統算例和華中電網算例均驗證了該方法的有效性。
[Abstract]:When the forced power oscillation occurs, it is very important to find the disturbance source quickly and remove it, which is very important to ensure the safe and stable operation of the power network. The electromechanical disturbance caused by forced power oscillation propagates along the transmission line in the power network. According to the disturbance waveform propagating to different positions, it has the characteristic of time delay. In this paper, a method of locating the disturbance source by using the least mean square time delay estimation method is proposed. After the forced power oscillation is detected by the quadratic difference method, by calculating the time difference and sequence of the disturbance waveform in the key bus frequency, the sequence of the disturbance propagation is analyzed, and the position of the disturbance source is determined. This method only needs wide area measurement information and can be applied online. The effectiveness of the method is verified by four-machine and two-area system examples and the central China power network examples.
【作者單位】： 武漢大學電氣工程學院;中國電力科學研究院;
【基金】：國家高技術研究發展計劃(863計劃)資助項目(2011AA05A119) 國家電網公司大電網重大專項資助項目(SGCC-MPLG029-2012)~~
【分類號】：TM712

【參考文獻】

相關期刊論文 前7條

1 余一平;閔勇;陳磊;張毅威;;基于能量函數的強迫功率振蕩擾動源定位[J];電力系統自動化;2010年05期

2 楊東俊;丁堅勇;李繼升;許漢平;禹海峰;;基于參數辨識的強迫功率振蕩擾動源定位方法[J];電力系統自動化;2012年02期

3 陳磊;陳亦平;閔勇;胡偉;張昆;;基于振蕩能量的低頻振蕩分析與振蕩源定位(二)振蕩源定位方法與算例[J];電力系統自動化;2012年04期

4 湯涌;;電力系統強迫功率振蕩的基礎理論[J];電網技術;2006年10期

5 董超;劉滌塵;廖清芬;王波;李文鋒;陳恩澤;云雷;;基于能量函數的電網低頻振蕩及擾動源定位研究[J];電網技術;2012年08期

6 楊毅強;劉天琪;李興源;胡楠;史華勃;;電力系統強迫功率振蕩的等效電路定位分析法[J];電網技術;2012年11期

7 李穎;沈沉;劉鋒;;基于Hamilton實現的電力系統振蕩源設備級定位[J];電力系統自動化;2012年23期

【共引文獻】

相關期刊論文 前10條

1 馬建偉;竺煒;曾U喺，

本文編號：2406384