【摘要】：在磁共振模式無線供電系統的實際應用中,通常要求系統輸出電壓保持恒定,為提高系統傳輸功率的穩定性,還需要系統工作頻率保持恒定。本文以發射線圈為并聯補償、接收線圈以及共振線圈均為串聯補償?shù)拇殴舱衲Ｊ綗o線供電系統為研究對象,基于互感模型,給出了系統發射線圈恒流,輸出電壓恒壓的參數邊界條件,從而在不需要控制器的條件下,通過恒頻驅動,在線圈之間距離不發生改變的前提下,能夠保證負載變化時系統仍然能夠處于恒壓狀態。仿真和實驗表明所提出方法具有良好的恒壓特性。
[Abstract]:In the practical application of magnetic resonance mode wireless power supply system, the output voltage is usually required to keep constant. In order to improve the stability of transmission power, it is also necessary to maintain the constant operating frequency of the system. In this paper, the transmission coils are used as parallel compensation, the receiving coils and resonance coils are all compensated in series, and the magnetic resonance mode wireless power supply system is studied. Based on the mutual inductance model, the constant current of the transmitting coils of the system is given. The parameter boundary condition of the output voltage constant voltage can ensure that the system can still be in constant voltage state under the condition that the controller is not needed and the distance between the loops is not changed by the constant frequency drive. Simulation and experiments show that the proposed method has good constant voltage characteristics.
【作者單位】： 重慶大學自動化學院;
【基金】：國家自然科學基金資助項目(51207173,51277192)
【分類號】：TM724
，

本文編號：2348521