【摘要】：為準確計算油浸變壓器的溫度場,在對比有限體積法(FVM)和有限差分法(FDM)各自優點的基礎上,提出了一種計算變壓器溫度場的混合計算方法。以駐馬店金橋變電站的一臺31.5 MVA主變?yōu)槔?建立了3維模型,利用有限體積和有限差分混合計算方法,并在繞組和鐵芯的熱傳導計算中采用了高精度的預條件共軛梯度解法(PCGM),計算了變壓器的3維溫度場。將利用混合方法的平均溫度計算結果分別與實際監測數據、使用同樣模型的FDM及FVM算法計算出的數據、以及使用IEEE導則模型計算出的數據進行了對比。對比結果表明:混合算法的計算精度明顯高于利用IEEE導則模型、FDM算法和FVM算法的計算結果,證明了這種混合計算方法能更準確地計算油浸式變壓器的內部溫度場。
[Abstract]:In order to accurately calculate the temperature field of oil-immersed transformer, a hybrid calculation method for calculating temperature field of transformer is proposed on the basis of comparing the advantages of finite volume method (FVM) and finite difference method (FDM). Taking the 31.5 MVA master transformation of Jinqiao substation in Zhumadian as an example, a three-dimensional model is established, and the finite volume and finite difference hybrid calculation method is used. The high precision preconditioned conjugate gradient solution (PCGM),) is used to calculate the three dimensional temperature field of the transformer in the heat conduction calculation of the winding and the core. The calculated results of the average temperature using the hybrid method are compared with the actual monitoring data, the data calculated by the FDM and FVM algorithms of the same model, and the data calculated by the IEEE guideline model. The comparison results show that the accuracy of hybrid algorithm is obviously higher than that of using IEEE guide model, FDM algorithm and FVM algorithm. It is proved that the hybrid algorithm can calculate the internal temperature field of oil-immersed transformer more accurately.
【作者單位】： 華北電力大學河北省輸變電設備安全防御重點實驗室;中國電力科學研究院;國網河南省電力公司駐馬店供電公司;
【基金】：國家高技術研究發展計劃(863計劃)(2012AA050802) 中央高�；究蒲袠I(yè)務費項目(13MS73) 國家電網科技項(1206112011018)~~
【分類號】：TM411

【參考文獻】

相關期刊論文 前10條

1 劉文澤;蔡澤祥;黃松波;金向朝;單蒙;;高壓電力電容器內部最熱點溫度的計算模型[J];電力自動化設備;2009年07期

2 陳偉根;蘇小平;孫才新;潘，

本文編號：2327776