基于釩電池的儲能供電系統控制策略設計
發布時間：2018-10-24 20:11
【摘要】：電能對整個社會的發展起著重要作用,不論是生產還是生活,突然斷電都會帶來嚴重后果,影響正常社會秩序。尤其是生產生活中的重要設施,如醫院、煉鋼廠等,如果發生停電情況,將造成重大的政治影響和經濟損失。本文研究了一種新的儲能供電系統。系統在儲能方面采用釩電池儲能為主,鉛酸電池儲能為輔的結構;變換器方面采用雙向變換器,實現一機兩用;控制方面通過改進能量控制算法,優化了能量調度,提高了系統使用壽命和供電可靠性,并且有利于系統模塊化和容量擴充。論文首先介紹了新型全釩液氧化還原電池儲能技術,并對電池進行研究分析,建立了等效損耗仿真模型,動態的模擬了電池充放電過程中主要參數變化。在對電池特性研究的基礎上設計了電池充放電所需的雙向接口變換器。在分析對比幾中常用拓?fù)浜筮x擇了結構簡單、功率器件電氣應力較小的雙向半橋Buck/Boost作為變換器拓?fù)�。其�?論文基于釩電池儲能供電模塊,提出了整個儲能供電系統結構。其中鉛酸電池及其接口變換器組成輔助儲能供電模塊,配合釩電池儲能供電模塊工作。而雙向DC-AC變換器在電網有電時和電網一起組成供電模塊給儲能單元充電;在電網斷電時,和交流負載一起組成負載模塊,由儲能模塊進行供電。針對系統中電網,釩電池,鉛酸電池,負載之間的多種能量供需狀態,系統需要對各模塊進行能量管理控制�？紤]到系統共直流母線結構,論文參考并改進了直流母線電壓信號控制算法并應用改進后的算法對系統工作模態進行了劃分,并分析了模態之間的相互轉換。論文在改進后的能量管理控制策略下針對各接口變換器進行了控制框圖設計。其中DC-DC變換器采用了電壓外環疊加電流內環共用的控制結構,實現了工作模態無縫切換,但帶來了PI控制器退飽和問題,論文通過引入抗積分?jǐn)?shù)字PI解決了PI退飽和問題。DC-AC變換器因并離網工作模態差異大,論文分別進行了獨立設計。對應控制框圖,在變換器數學建模基礎上,論文結合系統具體參數在離散域設計了控制器參數。最后建立了Matlab/simulink仿真模型,對前面的理論分析結果和控制策略設計進行了仿真驗證,證明了理論分析的正確性和控制策略的有效性。
[Abstract]:Electric energy plays an important role in the development of the whole society. Whether it is production or life, sudden power failure will bring serious consequences and affect the normal social order. In particular, important facilities in production and life, such as hospitals, steel mills and so on, will cause great political impact and economic losses if power failure occurs. In this paper, a new energy storage power supply system is studied. The system adopts the structure of vanadium battery as the main energy storage, lead-acid battery as the auxiliary energy storage; the converter adopts the bidirectional converter to realize a dual purpose; in the control aspect, the energy scheduling is optimized by improving the energy control algorithm. The system service life and power supply reliability are improved, and it is beneficial to modularization and capacity expansion of the system. In this paper, the energy storage technology of a new type of vanadium redox battery is introduced, and the battery is studied and analyzed, and the simulation model of equivalent loss is established, and the main parameters of the battery during charge and discharge are simulated dynamically. Based on the study of battery characteristics, a bidirectional interface converter for battery charging and discharging is designed. After analyzing and comparing several common topologies, bidirectional half-bridge Buck/Boost with simple structure and low electrical stress of power devices is selected as converter topology. Secondly, based on the energy storage and power supply module of vanadium battery, the structure of the whole energy storage system is proposed. Lead acid battery and its interface converter form auxiliary energy storage power supply module and work with vanadium battery energy storage power supply module. The bi-directional DC-AC converter forms a power supply module to charge the energy storage unit together with the grid when the power is available, and when the power is off, it forms a load module together with the AC load, which is powered by the energy storage module. In view of the various energy supply and demand states between power grid, vanadium battery, lead acid battery and load, the system needs to control the energy management of each module. Considering the common DC bus structure of the system, this paper refers to and improves the DC bus voltage signal control algorithm, and applies the improved algorithm to partition the operating modes of the system, and analyzes the interconversion between the modes. In this paper, the control block diagram of each interface converter is designed under the improved energy management control strategy. The DC-DC converter adopts the common control structure of voltage outer loop superposition current inner loop to realize the seamless switching of working mode, but it brings the problem of desaturation of PI controller. In this paper, the problem of PI desaturation is solved by introducing anti-integration digital PI. The DC-AC converter is designed independently because of the large difference in the mode of operation. Corresponding to the control block diagram, the controller parameters are designed in discrete domain based on the mathematical modeling of the converter. Finally, the Matlab/simulink simulation model is established, and the simulation results and control strategy design are verified, which proves the correctness of the theoretical analysis and the effectiveness of the control strategy.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM912;TM46
本文編號：2292426
[Abstract]:Electric energy plays an important role in the development of the whole society. Whether it is production or life, sudden power failure will bring serious consequences and affect the normal social order. In particular, important facilities in production and life, such as hospitals, steel mills and so on, will cause great political impact and economic losses if power failure occurs. In this paper, a new energy storage power supply system is studied. The system adopts the structure of vanadium battery as the main energy storage, lead-acid battery as the auxiliary energy storage; the converter adopts the bidirectional converter to realize a dual purpose; in the control aspect, the energy scheduling is optimized by improving the energy control algorithm. The system service life and power supply reliability are improved, and it is beneficial to modularization and capacity expansion of the system. In this paper, the energy storage technology of a new type of vanadium redox battery is introduced, and the battery is studied and analyzed, and the simulation model of equivalent loss is established, and the main parameters of the battery during charge and discharge are simulated dynamically. Based on the study of battery characteristics, a bidirectional interface converter for battery charging and discharging is designed. After analyzing and comparing several common topologies, bidirectional half-bridge Buck/Boost with simple structure and low electrical stress of power devices is selected as converter topology. Secondly, based on the energy storage and power supply module of vanadium battery, the structure of the whole energy storage system is proposed. Lead acid battery and its interface converter form auxiliary energy storage power supply module and work with vanadium battery energy storage power supply module. The bi-directional DC-AC converter forms a power supply module to charge the energy storage unit together with the grid when the power is available, and when the power is off, it forms a load module together with the AC load, which is powered by the energy storage module. In view of the various energy supply and demand states between power grid, vanadium battery, lead acid battery and load, the system needs to control the energy management of each module. Considering the common DC bus structure of the system, this paper refers to and improves the DC bus voltage signal control algorithm, and applies the improved algorithm to partition the operating modes of the system, and analyzes the interconversion between the modes. In this paper, the control block diagram of each interface converter is designed under the improved energy management control strategy. The DC-DC converter adopts the common control structure of voltage outer loop superposition current inner loop to realize the seamless switching of working mode, but it brings the problem of desaturation of PI controller. In this paper, the problem of PI desaturation is solved by introducing anti-integration digital PI. The DC-AC converter is designed independently because of the large difference in the mode of operation. Corresponding to the control block diagram, the controller parameters are designed in discrete domain based on the mathematical modeling of the converter. Finally, the Matlab/simulink simulation model is established, and the simulation results and control strategy design are verified, which proves the correctness of the theoretical analysis and the effectiveness of the control strategy.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM912;TM46
【參考文獻】
相關期刊論文 前2條
1 張犁;孫凱;吳田進;邢巖;;基于光伏發電的直流微電網能量變換與管理[J];電工技術學報;2013年02期
2 廖志凌;阮新波;;獨立光伏發電系統能量管理控制策略[J];中國電機工程學報;2009年21期
，本文編號：2292426
本文鏈接：http://sikaile.net/kejilunwen/dianlilw/2292426.html
最近更新
教材專著
